HDPE storage tank How to clean up

HDPE storage tank is propylene storage and transportation equipment. The actual results of HDPE storage tank for raw materials will be relatively stable, and its good sealing property is also favored by the company. However, after people use HDPE storage tank, they will generally find some sediment left in the machinery and equipment. If not cleaning immediately will reduce the application efficiency of HDPE tanks, what better way to clean HDPE tanks? Let the HDPE tank manufacturer tell you about the main contents as follows:

1. Clean the surface of HDPE storage tank with pallet cloth after each production. It is strictly prohibited to use a large amount of water to clean the outside of the machine and equipment continuously to prevent damage to the insulation layer. PPH storage tank

2. According to the processing technology, the water tank shall be cleaned after a certain time of manufacturing. After a long time and more than 72 hours, the mechanical equipment shall be cleaned again after shutdown and before starting work.

3. Cleaning specification: separate types of machinery and equipment cannot be cleaned to check visible dirt; The processing technology of several disassembly types applied in the same machine and equipment shall be carried out according to the regulations.

4. The actual operator shall fill in the cleaning record immediately, collect the project work experience and sign for confirmation.

5. The HDPE storage tank shall be cleaned according to the requirements of Chinese standards. When entering the machine and equipment for cleaning, a sponge pad should be laid at the bottom of the bus to prevent special tools from falling in, and rubber shoes should be worn to prevent the surface of laminated glass from being damaged.

6. No acid is allowed in the collet of the product. If the chuck must be cleaned with acid, the acid with pH value less than 2 cannot be used. The acid entering the chuck of machinery and equipment will cause the hydrogen effect, which will cause a large area of fish scale surface to fall off. Generally, 2% sodium hypochlorite solution can be used to clean the chuck, and then tap water can be used to clean the chuck.

So here is the cleaning efficiency of HDPE storage tank. You must do a good job in cleaning when you use it in the future, so that it can last longer.

PPH winding tank It is suggested that the above content is collected by the Internet and the copyright belongs to the original author. If there is any infringement, please contact us to delete the content. Thank you!