PPH storage tank Mainly used to store compounds. Therefore, for better safety consideration, PPH storage tank layout has certain provisions. What are the main regulations?

The grouping of PPH storage tank farm shall fully comply with the specified standards for the overall process flow of the whole plant and the overall layout of the warehouse of the whole plant.

The PPH storage tank farm should generally be placed in a separate area. However, it can be placed in the same block with the relevant oil pump room, so as to shorten the length of the pipeline between the PPH storage tank and the pump room, reduce the friction loss of the pipeline and facilitate oil absorption. Control surface cable in pump and oil tank area. It is also led to the nearby control room (the operator duty room and the tank farm external control room usually form a building with the pump room), and the operator's patrol operation is also more convenient.

Frozen or non frozen liquefied petroleum gas tanks shall be installed in places with good ventilation and drainage.

When determining the elevation of the foundation surface of the PPH storage tank farm, it shall fully meet the requirements for the net suction head of the pump in the pump room.

The height from the low point of the spherical tank to the ground shall be at least 1.5m to maintain good ventilation around the spherical tank. For bottom outlet spherical tanks, this height must be considered together with the net positive suction head (NPSH) of the pump before making a decision.

Raw material tank farm and intermediate raw material tank farm shall be located as close as possible to relevant production equipment. The planned ground elevation of the tank farm shall be equal to or equal to the planned ground elevation in the production equipment. In order to shorten the water inlet pipeline from the tank farm to the raw material pump of production equipment as much as possible, reduce friction loss, ensure that the raw material pump of equipment has a satisfactory net suction head, avoid pumping, and ensure safe and reliable continuous production of production equipment. Set the material pump of the production equipment outside the production equipment.

The orientation of the product tank farm should be as close to the oil injection equipment as possible. When the oil pipeline is exported, the product tank farm shall be as close as possible to the initial station of the oil pipeline to meet the requirements of product export in time.

chemical PPH winding tank The area shall be placed close to the unloading equipment, and shall be placed in the same area with the chemical delivery pump room. If chemicals are transported into the plant area by truck tankers, chemical PPH winding storage tank area, pump room and unloading truck can be placed in one area, such as alkali liquor, acid liquor and ammonia liquor.

The additive tank farm shall be close to the equipment using additives, such as lubricating oil additives.

The starting oil and slop tank farm should be placed near the production equipment that can handle slop oil, such as atmospheric distillation equipment and catalytic equipment, so that the recovered slop oil can be collected and regenerated in time.

The above content is collected and sorted by the Internet, and the copyright belongs to the original author. If there is infringement, please contact us to delete the content, thank you!