After purchasing PPH winding storage tank, the next work is to arrange PPH winding storage tank in the factory. Since the winding tank of PPH is mainly used to store chemicals, what are the layout requirements of the winding tank of PPH for the sake of stability? It is recommended that you:

1. The grouping of tank farm shall try to meet the requirements and standards of the overall process flow of the whole plant and the general layout of the warehouse of the whole plant. PPH storage tank

2. The winding tank and storage tank area of PPH should be placed in separate areas. However, it can be placed together with the relevant oil pump room to shorten the length of the pipeline between the winding tank of PPH and the pump room and reduce the friction loss of the pipeline, which is conducive to pump suction and the appearance of the control cable in the tank farm.

3. Frozen or non frozen LPG spherical tanks shall be set in areas with good ventilation and drainage.

4. When confirming the elevation of the bottom surface of the PPH winding storage tank area, it should fully meet the requirements of the net suction head of the pump in the relevant pump room.

5. The height of the spherical tank from the low point to the ground is less than 1.5m to maintain good ventilation around the spherical tank. For bottom outlet spherical tanks, this height should be considered together with the net positive suction head of the pump.

6. The orientation of material storage tank farm and intermediate material storage tank farm shall be as close to relevant production equipment as possible. The planned ground elevation of the tank farm shall be higher than or equal to the planned ground elevation of the production equipment. In order to make the pipeline from the tank farm to the inlet of the material pump of the production equipment as short as possible, reduce friction loss, ensure that the material pump of the equipment has a satisfactory net suction head, avoid busy, ensure that the production equipment is stable and reliable in continuous production, and try to prevent the material pump from being set outside the production equipment.

7. The winding storage tank area of chemical agent PPH should be close to the unloading equipment, and should be placed in the same area with the chemical agent delivery pump room. If the chemical agent is transported to the factory by truck tanker, the winding tank farm, pump house and unloading truck of chemical agent PPH can be placed in one area, such as alkali liquor, acid, ammonia, etc.

8. The oil and waste oil storage tank farm should be located near the production equipment that can handle the waste oil, such as atmospheric distillation equipment and catalytic equipment, so that the centrally recovered waste oil can be treated and circulated in time. PPH mixing tank

The above content is collected by the Internet, and the copyright belongs to the original author. If there is any infringement, please contact us to delete the content. Thank you!