The key of the tank manufacturing method of PPH is the one-time forming winding method, which is simple in structure. The storage tank of PPH is simple in structure and convenient in use. PPH winding tank

In the actual construction and application of the project, due to the low frequency of use, the vertical PPH storage tank usually only considers the static load, and its performance is slightly larger. For vertical PPH tanks with large capacity, concrete rubber bearings and metal rubber bearings can be considered. However, the metal rubber bearing is too tightly bonded, and the plastic has certain sealing and expansion properties. This will damage the compressive strength of the storage tank, and the appearance is not beautiful. Concrete rubber bearing is recommended. For smaller capacities, plastic rubber bearings will be considered immediately.

1. When the rubber bearing is a plastic rubber bearing, the tensile strength, bending stiffness, service life and production quantity must be considered.

2. Rubber bearing For metal rubber bearing, other standards shall be maintained, and the surface of metal rubber bearing shall have corrosion resistance.

3. When the rubber bearing is concrete rubber bearing, the compression strength provisions shall be considered when comparing the concrete rubber bearing of first horizontal tank, and the total number of rubber bearings should be about 2.

The design scheme of PPH storage tank is simple in structure and convenient in use. It is necessary to pay attention to the rubber bearing method for private use. In more application priority areas, everyone must choose a different number of rubber bearings and the materials used.

The storage tank of PPH is one of the industrial green anti-corrosion equipment. We should select the type of storage tank according to the actual requirements, and determine the size of the equipment according to the requirements of the actual use occasions. PPH mixing tank

The above content is collected by the Internet, and the copyright belongs to the original author. If there is any infringement, please contact us to delete the content. Thank you!