PPH storage tank In the process of use, the treatment of reaction materials mainly depends on the temperature change of the reactor to realize the material reaction. If the temperature control of the reactor is unbalanced, it is bound to affect the reaction process and effect. How to ensure its temperature balance? Let's find it together!
In order to control the reaction speed of PPH storage tank, the top opening should not be too fast. When operating the equipment, people often act too hastily, and the machine rotates to a larger value. In fact, this approach is often counterproductive. In this case, the equipment is easy to be inverted, resulting in deformation of the mixing tank. In addition, in addition to deformation, it will also lead to rapid temperature rise, which will damage the mechanical properties.
It is also necessary to adjust the cooling temperature of PPH tank to make it run gradually. Once the temperature rises to the rated temperature, the material reaction will be affected. In this case, the cooling effect of the cooling system is very important, but attention should be paid to step by step to avoid excessive temperature difference.
In order to balance the temperature of the PPH tank, it is also necessary to handle the amount of materials within a reasonable range, so the larger the amount of materials handled, the higher the reactor temperature. This is to warn the equipment operator that the ideal temperature may not be reached within the specified time due to excessive materials, but this is normal.
PPH storage tank has good integrity, no welding, no water seepage, strong impact resistance, high compressive strength, good oxidation resistance and aging resistance, and meets food standards. The exhaust hole is an important part of it. What is the installation method?
When the water inflow and outflow of PPH storage tank is large, the corresponding flow vent shall be set. If you want to change the liquid, you need to know whether the tank allows liquid. If necessary, please refer to the company's website or contact the company's technology department. If there is a connecting pipe or flange pipe at the bottom of PPH storage tank, it should be vertical to the vessel wall to avoid uneven expansion of the vessel wall after liquid filling, resulting in leakage, damage to the connecting pipe and, in serious cases, damage to the big drum. When the liquid inlet is higher from the tank bottom, the liquid inlet shall bend towards the tank wall to make the incoming liquid fall along the tank wall and reduce the impact on the tank bottom. The tank body bears high pressure and must be reinforced when connecting other flanges.
In general, flanges and PPH winding tank It is usually tightened in the factory, which will cause looseness during transportation, loading and unloading. Before use, the user should check and test the sealing performance of the rotational plastic storage tank, and add liquid to see if there is any leakage. Tanks containing chemical liquids shall be leak tested with water to prevent loss.
The above content is collected and sorted by the Internet, and the copyright belongs to the original author. If there is infringement, please contact us to delete the content, thank you!
