PPH storage tank The tank body is processed by spiral extrusion technology. Deformation is carried out to ensure the integrity of the tank. In the traditional processing form, the plate is butt welded to form the tank body. Since the plate width is 2000mm and the tank height is generally greater than 2000mm, the tank is manually welded in sections in the actual process. A stiffening ring was added to splice the tank.

What should be paid attention to when cleaning PPH storage tank? This should be done in accordance with standard requirements. When entering the machine and cleaning the equipment, the bottom of the pot should be padded with a sponge pad to prevent special tools from falling in, and rubber shoes should be used to prevent the laminated glass from being damaged. If acid must be used to clean the collet, acid with pH<2 cannot be used. The acid entering the jacket of the machine will produce hydrogen effect PPH winding tank The surface layer, such as fish shell, falls off in a large area. Generally speaking, the cleaning sleeve can be cleaned with 2% sodium hypochlorite solution first, and then with tap water.

The above content is collected and sorted by the Internet, and the copyright belongs to the original author. If there is infringement, please contact us to delete the content, thank you!