PPH winding tank It has the characteristics of low water content, good insulation and corrosion resistance, and is used in crude oil, chemical plants, pharmaceuticals, electronic devices, new energy technology and other manufacturing industries. When using and installing, pay special attention to the following points:

There shall be no positive pressure and negative pressure during use. Generally, the storage tank must have an air vent when leaving the factory. It is strictly prohibited to block this vent.

The valve cannot be directly installed on the flange and needs to be connected with a short pipe.

Check the water leakage of the manhole, and repair it if there is any problem.

The bearing capacity of tank foundation shall be considered.

The liquid contained cannot reach the head or the top of the cone.

During grouting and output, an open port must be opened to prevent damage to mechanical equipment.

If there is a water pipe with a joint or looper flange at the bottom, the water pipe shall be connected with a flexible joint, and the barrel wall shall be vertically divided to prevent leakage due to uneven expansion under the inner wall. A bucket filled with liquid. In more serious cases, the connector and barrel will be damaged.

When the liquid inlet is higher from the bottom of the tank, the liquid inlet shall bend towards the tank wall to make the incoming liquid fall down along the tank wall, which can reduce the impact on the tank. The bottom of the tank.

The installation, use and maintenance of PPH packaging storage tank must refer to relevant executive standards.

In daily life, PPH mixing tank is a common chemical equipment. It is widely used. It can be seen in large and small chemical enterprises. PPH mixing tank The conventional mixing forms include anchor type, frame type, propeller type, propeller type, etc. So how should we choose our own mixing tank?

The selection of PPH mixing tank is the core and technical aspect of PPH mixing tank. First of all, the selection of agitator type is determined according to the effect to be achieved by PPH mixing tank. For example, the axial flow agitator is selected for thorough mixing, dissolution, heat transfer and gas absorption of materials. Decentralized selection of runoff types. Secondly, the mixing power must be selected according to the size, density, viscosity of the mixing tank, the solid content of the materials in the tank, the type, diameter, speed and other factors of the mixer.

The material of PPH mixing tank shall be determined according to the medium in the tank. Enamel tanks are generally used for acidic media, and stainless steel tanks are generally used for alkaline media. Of course, titanium alloy materials should also be selected according to customer requirements.

According to the shape of PPH mixing tank and the volume of PPH mixing tank, use the workshop space to determine the size of PPH mixing tank, so that the layout of the workshop is neat and even.

PPH mixing tank is corrosion resistant, scientific in design, reasonable in structure, excellent in performance, complete in specifications and styles, and safe and reliable in use.

The above content is collected and sorted by the Internet, and the copyright belongs to the original author. If there is infringement, please contact us to delete the content, thank you!