HDPE storage tank : Polyethylene is used as the raw material and molded in a rotational mold. It has the advantages of no leakage, aging resistance, impact resistance, corrosion resistance and long service life. However, HDPE storage tanks also need to take safety measures in operation.
1. When entering the construction site, workers shall wear safety helmets and fasten safety belts for high-altitude operation.
2. Foam fire extinguishers and other fire-fighting equipment shall be placed separately on the site.
3. In case of any abnormal phenomenon during the pressure test of HDPE storage tank, it is strictly prohibited to operate under pressure. If there is any abnormal movement during the test run, it shall be parked for inspection.
4. When installing HDPE storage tanks, special personnel shall be designated to command the lifting and commissioning, and multiple command is prohibited.
5. During the lifting of HDPE storage tank, irrelevant personnel are not allowed to enter the site. When lifting heavy objects, no one shall stand below, and the construction site shall be equipped with protective fences.
6. Construction power needs to be connected by professional electricians, and non professional electricians are not allowed to connect.
7. The construction site is an extension of the factory area. It is forbidden to hit other equipment and process pipes during construction. The original pipes or equipment shall be drilled and approved before construction.
HDPE tanks are widely used because of their excellent performance. While focusing on personal safety, everyone can increase efficiency and product value through safety measures. Butt welding of HDPE storage tank is a process of processing granular materials into tank body by spiral extrusion winding machine. We all know the advantages of this process, so we can follow it. If you find the above content helpful, please continue to pay attention to us. HDPE storage tank is actually made of polyethylene with good density, so when it is used again, it also has various good properties of polyethylene. Let's take a detailed look at the performance of the system when it is used.
When HDPE storage tanks are used, they think that the raw materials they use determine their good performance. Because the raw materials they use are of high crystallinity, they also have good chemical resistance when they are used again, Therefore, most of the chemicals we can contact in life can be stored in HDPE tanks, and the tanks have good waterproof performance and do not absorb moisture. Therefore, when they are used as storage tanks, there is little need to worry about leakage. In addition, polyethylene is used in many cables because of its good insulation performance, and it also has good impact resistance when used in high density, even in low environment, In addition, this type of storage tank is more convenient for processing, and can be processed again after use, but it can not be used in industries directly contacting food after secondary processing.
HDPE storage tanks are made of polyethylene, which has good storage performance in many liquid storage processes. Although they are made of polyethylene, in fact, the requirements for materials during production and processing are different, The products produced in this way can be used in different occasions.
When the storage tank made of polyethylene is produced and processed again, it does not need to use traditional welding, so its volume will be larger when it carries liquid. Because the HDPE storage tank does not need to be welded, so there is no weld. When it is used again, it does not need to worry about instability due to too much carrying liquid.
Generally speaking, most storage tanks have a stability coefficient. The reason why the stability performance of storage tanks is different is that the performance of raw materials used is different. If the materials used are poor, even if the process is good, the stability performance is not guaranteed. When selecting raw materials for storage tanks, the first thing we should do is to check the quality certificate and inspection report of the raw materials. After checking, all data can be put into production only if they meet the standards. Besides, plates are used at the top and bottom of the tank, so there are requirements for plates. PPH storage tank
