PPH storage tank Can its service life be extended? Of course, the answer to this question is yes. For PPH storage tank equipment, our normal business operation will also well ensure the service life of PPH storage tank. Just like normal proper maintenance, overhaul will affect their service life.
1. First, install the PPH storage tank. The platform is horizontal and can bear the corresponding pressure. If it is made of steel, the gap should not be too large. Put a board or iron plate on it. Check that to avoid damaging the water tank, concrete can also be used as the base material, which requires flatness. The ordinary mud floor can be pretreated with boards to increase the pressure.
2. When chemicals are stored in PPH storage tank, proper drainage ditches, dilution facilities, leakage alarm equipment, etc. shall be set around the site after arriving at the site.
3. When installing 20 m3, 30 m3 and 50 m3 large capacity storage tanks, pay attention to safety and try to use a crane to enter the site.
4. After the installation of PPH storage tank, check the sealing performance of the interface in time before use. If conditions permit, add liquid to the interface and check for leakage. For the storage tank containing chemical liquid, it is recommended to conduct leakage test with water to avoid a large amount of liquid loss, so as to avoid human, material and financial losses.
5. The pipe connected by PPH tank bottom flange shall be perpendicular to the vessel wall. It is recommended to use flexible joints to avoid uneven shrinkage of the vessel wall after liquid filling, which may lead to damage and leakage of the joints, thus damaging the joint flange and directly extending the overall service life of the vessel.
6. When the water inlet is higher from the bottom of the PPH tank, the water inlet shall bend towards the tank wall to make the liquid fall along the tank wall, so as to reduce the direct impact of the liquid on the tank bottom.
7. When installing heavy auxiliary equipment such as mixer on the water tank, or when people are required to work on the top of the water tank, and the top of the water tank cannot bear the weight of people, please also make steel support for the water tank. PPH mixing tank Pay attention to safe operation of steel pipe ladders and fences.
8. If the liquid level cannot be checked in time during the production process or engineering operation, a liquid level gauge or sensor can be installed. The manufacturer of PPH plastic storage tank can be contacted to install an overflow port to prevent the storage liquid overflow from the top manhole from losing and injuring.
9. When the water flow in and out of the water storage tank is large, technicians shall be arranged to install exhaust pipes with corresponding flow in time.
We generally only know about maintenance and repair. We believe that today's consultation will give you more information, which can be used to extend the service life of your PPH tank.
The above content is collected and sorted by the Internet, and the copyright belongs to the original author. If there is infringement, please contact us to delete the content, thank you!
