along with PPH storage tank The utilization rate of is becoming more and more common, and its quality is also getting higher and higher. Because of its characteristics and advantages, it is widely used. What are the precautions for installation position?

Before the PPH storage tank is transported to the installation site for unloading, the storage tank shall be inspected to confirm that the storage tank is not damaged during transportation, and the accessories on the storage tank cannot be stressed. It is forbidden to use objects with sharp edges for lifting. The tank body shall be fixed with ropes in a proper way and unloaded from bottom to bottom. The bottom shall be protected from abrasion. Slings shall be used during operation.

For the installation of PPH storage tank, first ensure that the installation site of the equipment is flat and has sufficient bearing capacity. It is forbidden to place PPH storage tank on sandy and soft ground. If necessary, the foundation shall be specially designed and constructed, and attention shall be paid to equipment and foundation during installation. The installation of cushions, railings, escalators, etc. shall not increase the load of the equipment itself. The equipment shall not be installed near the vibration source. Otherwise, shock absorption measures shall be taken. Outdoor equipment shall be subject to anti-aging treatment. Wind load shall be considered.

As the usage rate of PPH storage tank is more and more extensive, only by selecting appropriate operation methods in the whole use process can we achieve a stronger use effect. What are the precautions.

As a large storage equipment, PPH storage tank is easy to be damaged in use if the bottom plate is not welded strictly enough. The base plate material is inconsistent. The use of welding rod is an external accessory, which cannot guarantee the consistency of the material with the base plate and cylinder, and has a certain impact on the quality of equipment. If manual factors are used for welding with portable welding gun, the welding strength cannot be consistent, and the weld surface is uneven. There are many hidden dangers of equipment leakage.

The PPH tank is made by external welding. The external welding of this operation adopts the imported full-automatic extrusion welding unit to realize most of the large stress welds of the storage tank. The new PPH particles with the same performance as the tank body are hot melted at the large weld seam and integrated with the tank bottom and tank body. Internal welding operation The internal welding adopts the automatic long arm extrusion welding process, which is an important step in all processes. The principle is the same as external welding, but its equipment is different. The welding process of the bottom plate is also an important choice when purchasing products. Carefully selected PPH mixing tank It will also ensure our normal use.

The above content is collected and sorted by the Internet, and the copyright belongs to the original author. If there is infringement, please contact us to delete the content, thank you!