Yulin PPH winding can manufacturer
PPH waste gas treatment tower is generally divided into cylindrical tower body or square tower body. The cylindrical tower body is generally vertical tower, and the square tower body is generally horizontal tower. There are multi-stage packing rings inside. During operation, the waste gas flows upward from the bottom of the tower. Due to tangential entry into the tower, especially the guiding effect of the packing layer, the flue gas rotates and rises, resulting in full contact between the packing layer and the waste gas, which sprays the downstream liquid into droplets, leaving a large contact area between gas and liquid; The liquid droplets will also be driven by the air flow to rotate, and the centrifugal force generated will strengthen the air contact at night. They will fall onto the tower wall and flow down along the wall, passing through the overflow device to the next layer of packing, and then the spray nozzle will atomize again for gas-liquid contact.
Yulin PPH winding can manufacturer
The performance characteristics of PPH storage tank are anti-corrosion and free of leakage. Easy to install, maintain and replace. Long service life, good sealing performance. High polymer plastic sliding roller can prevent the strip steel surface from being pulled during pickling. PPH storage tanks are commonly used for the storage and temporary storage of production materials in chemical, petroleum, medicine, food, grease, printing and dyeing, metallurgy, environmental protection, light industry and other industries. Because PPH storage tank has unique advantages over traditional anti-corrosion tank. Next, the advantages of PPH storage tank are introduced in detail. PPH storage tank has good integrity, no welding, no leakage, impact resistance, high tensile strength, good aging resistance, and meets the hygienic food standards. Due to the good performance of LLDPE and the special structure of polypropylene rolling tank, the service life of LLDPE can reach more than 15 years. Good chemical resistance. Except for some solutions that can make it expand, it can bear most of the material solutions. Polypropylene tank has the characteristics of internal and external anti-corrosion, and can be placed in a highly corrosive environment. Generally, the working conditions of storage tanks are atmospheric temperature and pressure; Under special circumstances, the working conditions of the storage tank can be lower than 70 ℃, and the hydraulic pressure can be less than 1 kg/cm2.
Yulin PPH winding can manufacturer
PPH mixing tank is made by seamless extrusion winding technology. Pipe orifice, inner weld and outer weld are all processed by automatic extrusion unit equipment, which is superior, stronger and lower than plastic tanks made by traditional technology. It is necessary to use electric heating to melt and extrude the particles onto the steel mold, which consumes a lot of power. The PP storage tank only has the power of the welding gun, so it consumes less power; The PPH mixing tank is welded with a large extrusion electric heating drag gun, which consumes a lot of power. The PP storage tank uses a small manual drag gun, which consumes less power. PPH reaction kettle uses PPH spiral extrusion and winding unit to process PPH granules into tank body forming process. The system adopts the process of hot melting PPH particles, extruding them, and then winding them onto steel dies to form cans. PPH reaction kettle has the characteristics of good integrity, uniform thickness, corrosion resistance, seamless, aging resistance and good leakage resistance.
Yulin PPH winding can manufacturer
The key requirements of PPH tank design are: no danger, reliable: the data of high strength and toughness of materials, and the interchangeability structure of media should have sufficient rigidity and pressure bending performance, and the sealing performance should be good. Meet process request: function request of life request. Good comprehensive economy has high consumption efficiency, low consumption coefficient, reasonable structure, complicated manufacturing, convenient transportation and convenient equipment. Easy to operate, maintain and control: maintain and better control. Good environmental performance of PPH storage tank: At present, great progress has been made in the design scheme, engineering construction and data information of large and medium-sized storage tanks in China. However, our country still lacks experience in the design and construction of high strength data of large storage tanks. In the future, our country should strengthen the development and implementation of large storage tanks to make the production process of large storage tanks more carbon friendly.
