Guangzhou PPH storage tank manufacturer
The working principle of PPH waste gas tower is to separate the pollutants in the gas and convert them into harmless substances to purify the gas. It belongs to differential contact countercurrent type. The packing in the tower body is the basic component of gas-liquid two-phase contact. After the gas outside the tower body enters the tower body, the gas enters the packing layer. On the packing layer, there is spray liquid from the top and spray liquid in front, and a layer of liquid film is formed on the packing. When the gas flows through the packing gap, it contacts with the packing liquid film for absorption or comprehensive reaction, The packing layer can provide sufficient surface area without causing excessive resistance to the gas flow. The absorbed or integrated gas is collected by the demister and discharged out of the tower through the air outlet.
Guangzhou PPH storage tank manufacturer
The small softening point of PPH storage tank is 108 ℃, and the large fragmentation point is - 70 ℃, so PP storage tank can generally be used to hold liquid with temperature ranging from - 40 ℃ to 60 ℃. The feed inlet, discharge outlet, liquid level gauge outlet, flange, etc. on the PPH storage tank body are all integrally formed and welded at one time, without additional feed inlet and outlet. When containing acid-base substances, acid-base resistant gaskets shall be provided. When organic substances (especially organic solvents) are contained, insoluble rubber gaskets shall be provided. PPH storage tank is made of polypropylene, which can contain inorganic acids, malic acid, salts, ammonium, alkalis, oils and most gaseous organic substances at normal temperature and pressure. PPH storage tank cannot be used to contain strong oxidants, such as concentrated sulfuric acid, concentrated nitric acid, etc. When using PPH storage tank, we should not forget that it is just a tool we use. If the tool is not used properly, it will also break down. Therefore, why we use PPH storage tank with different life depends on how we treat them.
Guangzhou PPH storage tank manufacturer
PPH mixing tank can be divided into two forms: sloping bottom and flat bottom. The corrosion resistant container with full plastic structure is made of modified polypropylene laminate, pure polypropylene or glass fiber reinforced pure polypropylene through secondary processing. Select and configure motors, reducers, mixing paddles, heating devices, etc. according to the actual situation of customers. This product is corrosion resistant, scientific in design, reasonable in structure, excellent in performance, complete in specifications and patterns, safe and reliable in use. It is mainly applicable to the reaction kettle, which is widely used in the material reaction in the production of petroleum, chemical industry, rubber, pesticide, dye, medicine, food and other industries. PPH mixing tank product description: production process: PPH reaction kettle uses PPH spiral extrusion winding unit to process PPH granules into tank body forming process. The system adopts the process of hot melting PPH particles, extruding them, and then winding them onto steel dies to form cans. PPH reaction kettle has the characteristics of good integrity, uniform thickness, corrosion resistance, seamless, aging resistance and good leakage resistance. Application field: It is used in chemical industry, metallurgy, rare earth, electronics, dyes, pigments, dyes, environmental protection, pharmaceuticals, power plants, brewing and other industries. Material used: PPH. Product specification: can be customized according to customer requirements.
Guangzhou PPH storage tank manufacturer
PPH storage tank is more advanced in materials and processing technology than polypropylene storage tank, but this will not lead to the price of the former being significantly higher than the latter, which is mainly due to the removal of intermediate profits and labor saving in the intermediate plate link. The whole tank body is thin and thick, so that the whole cylinder body is evenly stressed, the design is reasonable, and the mechanical strength and safety reliability of the tank body are guaranteed. In addition to being able to safely fill various corrosive liquids and having good sealing performance, the tank is light in weight and clean in appearance, and has more reliable advantages than plastic roll forming technology, plastic plate welding, FRP roll, hand glue technology, carbon steel lining technology and other technologies. The welding of the bottom of the tank and the bottom of the tank is the part that bears the large stress z. The internal and bottom of the tank are welded by mechanical cantilever, which can realize the large welding once without repeated welding, ensure that the tank and the tank will not leak under the rh condition, and can safely withstand various corrosive liquid operations.
