Zhaotong PPH storage tank manufacturer
Basic regulations for installation of PPH storage tank, service platform level and ability to withstand relative working pressure. If the steel frame structure is adopted, the gap should not be too large, and the wooden board or stainless steel plate should be laid. Check whether there are sharp objects such as steel nails on the wooden board to avoid damaging the storage tank or using concrete as the industrial foundation. Provisions for smooth leveling. Generally speaking, the mud road can be paved with blockboard to improve the compressive strength and working pressure. When organic chemicals are stored in PPH storage tank (first contact the manufacturer to order thickened storage tank), good outlet pipe trench and diluent equipment, or leakage alarm system shall be provided after the storage tank arrives at the site. It shall be provided around the site. When storing chemical liquid, first communicate with the manufacturer to determine the standard of storage tank, such as thickened storage tank. During operation, if PPH storage tank needs to be monitored, it can be monitored by level gauge or induction device. When it has been used for a long time, please refer to the storage requirements of PPH storage tank and clean the residual liquid in the tank in time.
Zhaotong PPH storage tank manufacturer
PPH storage tank mainly includes core processes such as tank body fabrication, bottom, top, manhole, internal and external welding of inlet and outlet flange interface, which will directly affect the integrity, aging resistance, leakage prevention, service life and mechanical strength of the entire PPH storage tank. PPH storage tank body is manufactured by spiral extrusion winding technology. PPH particles are melted on the spiral extrusion winding machine, and then the molten extrusion materials form a can body on the mold. When the temperature is reduced to a certain extent, the tank can be demoulded to ensure the integrity of the tank. However, in the traditional processing form of polypropylene tank, the plate is welded into the tank. Since the very wide plate is 2000 mm, the height of the tank body is generally more than 2000 mm. In actual processing, the tank bodies are welded one by one and then formed manually. Then, for safety reasons, a stiffening ring is added at the connection of the tank.
Zhaotong PPH storage tank manufacturer
The production method of PPH storage tank is one-time forming coiling method, so its structure is relatively simple and its application is relatively convenient. PPH extrusion winding seamless plastic anti-corrosion equipment, polypropylene storage tank, polypropylene reactor, waste gas absorption tower, washing tower, storage tank and other plastic anti-corrosion equipment. As a new type of high-quality product, what are the main technical characteristics of PPH storage tank? Chemical resistance: among all polypropylene pipes, the experiment proves that PPH pipe has strong chemical resistance; Long service life: PPH pipe has longer service life and higher system safety; Impact strength: Compared with traditional PPH pipe, PPH pipe has significant low-temperature impact strength; Internal and external anti-corrosion: It has the characteristics of internal and external anti-corrosion, and can be placed in a highly corrosive environment; High performance: good performance of PH pipe, flexible welding equipment and special technical support team can not only guarantee（ β)- The welding installation quality of PP-H pipe system can also provide customized processing of non-standard products for customers according to their needs.
Zhaotong PPH storage tank manufacturer
Comparison of PPH mixing tank price and PP mixing tank and maintenance measures. It is necessary to use electric heating to melt and extrude the particles onto the steel mold, which consumes a lot of power. The PP storage tank only has the power of the welding gun, so it consumes less power; The raw material of PPH mixing tank is PPH granular material, and the raw material of PP storage tank is polypropylene plate. The price of PPH granular material is more expensive than polypropylene plate; Cooling and demoulding are required, which are performed by electric device, but not for PP storage tank; Steel molds are required for processing, and natural gas is required for preheating before processing. The startup cost is high, and PP storage tank is directly rolled into a tank with polypropylene plates, so the cost is low; The PPH mixing tank is welded with a large extrusion electric heating drag gun, which consumes a lot of power. The PP storage tank uses a small manual drag gun, which consumes less power.
