Yibin PPH winding tank manufacturing

The production method of PPH storage tank is one-time forming coiling method, so its structure is relatively simple and its application is relatively convenient. PPH extrusion winding seamless plastic anti-corrosion equipment, polypropylene storage tank, polypropylene reactor, waste gas absorption tower, washing tower, storage tank and other plastic anti-corrosion equipment. As a new type of high-quality product, what are the main technical characteristics of PPH storage tank? Chemical resistance: among all polypropylene pipes, the experiment proves that PPH pipe has strong chemical resistance; Long service life: PPH pipe has longer service life and higher system safety; Impact strength: Compared with traditional PPH pipe, PPH pipe has significant low-temperature impact strength; Internal and external anti-corrosion: It has the characteristics of internal and external anti-corrosion, and can be placed in a highly corrosive environment; High performance: good performance of PH pipe, flexible welding equipment and special technical support team can not only guarantee（ β)- The welding installation quality of PP-H pipe system can also provide customized processing of non-standard products for customers according to their needs.

Yibin PPH winding tank manufacturing

When the storage tank made of polyethylene is produced and processed again, it does not need to use traditional welding, so its volume will be larger when it carries liquid. Because the HDPE storage tank does not need to be welded, so there is no weld. When it is used again, it does not need to worry about instability due to too much carrying liquid. Generally speaking, most storage tanks have a stability coefficient. The reason why the stability performance of storage tanks is different is that the performance of raw materials used is different. If the materials used are poor, even if the process is good, the stability performance is not guaranteed. When selecting raw materials for storage tanks, the first thing we should do is to check the quality certificate and inspection report of the raw materials. After checking, all data can be put into production only if they meet the standards. Besides, plates are used at the top and bottom of the tank, so there are requirements for plates.

Yibin PPH winding tank manufacturing

In the case of selecting the form of HDPE storage tank, it must still be determined according to the requirements, and it can perform well in terms of quality. Fortunately, superior product quality is certainly a basis for recognition. The better the product is, the more popular it will be. Its characteristics in all aspects are better, which is also a key to the requirements of industrial production and application. Products with good reputation will be more reassuring, so that they can be better in service level. If they are better in service level, they must be a basis for seeking good results, and then they can benefit from good product quality. Because there are many specifications of products, in order to meet the application requirements of different occasions, it is still necessary to select products based on actual requirements. In addition, HDPE tank repair can be made of polymer composite materials. The leakage test or hydraulic test shall be carried out after the bucket is repaired or replaced according to the internal and external inspection regulations.

Yibin PPH winding tank manufacturing

PPH mixing tank is made by seamless extrusion winding technology. Pipe orifice, inner weld and outer weld are all processed by automatic extrusion unit equipment, which is superior, stronger and lower than plastic tanks made by traditional technology. It is necessary to use electric heating to melt and extrude the particles onto the steel mold, which consumes a lot of power. The PP storage tank only has the power of the welding gun, so it consumes less power; The PPH mixing tank is welded with a large extrusion electric heating drag gun, which consumes a lot of power. The PP storage tank uses a small manual drag gun, which consumes less power. PPH reaction kettle uses PPH spiral extrusion and winding unit to process PPH granules into tank body forming process. The system adopts the process of hot melting PPH particles, extruding them, and then winding them onto steel dies to form cans. PPH reaction kettle has the characteristics of good integrity, uniform thickness, corrosion resistance, seamless, aging resistance and good leakage resistance.

Yibin PPH winding tank manufacturing

The key manufacturing method used in the production of PPH storage tank is one-time forming coiling manufacturing method, so it is simple in structure. The application of PPH storage tank is relatively convenient due to its simple construction. When the rubber bearing is a plastic rubber bearing, the compressive strength, stiffness, service life and total number of manufacturing shall be considered. When the rubber bearing is a metal rubber bearing, the other standards shall be the same as 1. In addition, the surface of metal rubber bearing shall be corrosion resistant. When the rubber bearing is a concrete rubber bearing, the concrete rubber bearing of the first horizontal tank shall consider the compression strength provisions, and the total number of rubber bearings shall be 2. When there are several rubber bearings, their design elevation shall be the same, and there is no need for uneven ground settlement, and the bottom shall be basically flat.

Yibin PPH winding tank manufacturing

PPH storage tank has good temperature resistance, acid and alkali resistance, high strength and impact resistance, longer service life, and no environmental stress fracture damage. At present, the tank has become a necessary equipment for chemical industry, smelting, rare earth, mining, pigment, printing and dyeing, new materials, new energy, and biomedicine. In the next few years, PPH storage tanks will be widely used. Manufacturing process of PPH storage tank: extruding and winding PPH granular materials. The product is formed at one time without welding. PPH tank is welded by polypropylene plate. In terms of corrosion resistance, PPH vertical storage tank and PH vertical storage tank have similar corrosion resistance. From the perspective of safety performance, the PPH tank shell is integrally formed without welding and leakage, while the PPH tank is welded, which is easy to cause leakage and increase unsafe factors. There is a big gap between the other two properties, such as aging resistance.