Yangjiang PPH Storage Tank Company
Pph storage tank is a kind of plastic container made by rotational molding process. it has become the equipment needed for chemical industry, smelting, mining and new materials. Do you know what problems should be paid attention to during the installation and use of pph storage tank? The platform for installing pph storage tank shall be able to bear the weight of storage tank and solution. The platform shall be flat and smooth to prevent some sharp objects from damaging the storage tank. If heavy additional equipment is installed on the tank, or if a person needs to work on the top of the tank but the tank cannot bear the weight of a person, support or related equipment should be used to assist in the operation. When the liquid inlet is higher than the tank bottom, the liquid inlet shall bend towards the tank wall to let the incoming liquid flow along the tank wall, so as to reduce the direct impact of liquid on the tank bottom. When storing chemical liquids, first communicate with the manufacturer to determine the specifications of storage tanks, such as thickened storage tanks. In use, if pph storage tank needs to be monitored, it can be monitored by level gauge or induction device. When it has been used for a long time, please refer to the storage requirements of pph storage tank and clean the residual liquid in the tank in time. If a large amount of liquid is sucked in and discharged from the pph storage tank, special technicians need to be arranged to install the corresponding exhaust pipe.
Yangjiang PPH Storage Tank Company
PPH storage tank is more advanced in materials and processing technology than polypropylene storage tank, but this will not lead to the price of the former being significantly higher than the latter, which is mainly due to the removal of intermediate profits and labor saving in the intermediate plate link. The whole tank body is thin and thick, so that the whole cylinder body is evenly stressed, the design is reasonable, and the mechanical strength and safety reliability of the tank body are guaranteed. In addition to being able to safely fill various corrosive liquids and having good sealing performance, the tank is light in weight and clean in appearance, and has more reliable advantages than plastic roll forming technology, plastic plate welding, FRP roll, hand glue technology, carbon steel lining technology and other technologies. The welding of the bottom of the tank and the bottom of the tank is the part that bears the large stress z. The internal and bottom of the tank are welded by mechanical cantilever, which can realize the large welding once without repeated welding, ensure that the tank and the tank will not leak under the rh condition, and can safely withstand various corrosive liquid operations.
Yangjiang PPH Storage Tank Company
When PPH storage tank is used, the filling rate shall not be greater than 95%, and excessive filling is strictly prohibited. Made of polypropylene, it can contain inorganic acid, malic acid, salt, ammonium, alkali, oil and most gaseous compounds under normal temperature and pressure; The lower cracking temperature and dissolution temperature of PPH storage tank are - 70 ℃ to 108 ℃, and the temperature of the liquid contained is usually between - 40 ℃ and 60 ℃; The filling rate of PPH storage tank shall not be greater than 95% when it is used, and excessive filling is strictly prohibited; When the valves, instruments, pipes, etc. on the equipment are frozen, nitrogen, air or hot water at 70~80 ℃ shall be used for thawing, and open fire heating is strictly prohibited; The PPH storage tank shall be equipped with acid and alkali resistant gaskets when containing acid and alkali liquids, and insoluble rubber gaskets when containing organic solvents; If you are not sure whether you can contain the required substances, you can consult our technical personnel, and if necessary, you can carry out the tank material sample soaking test.
Yangjiang PPH Storage Tank Company
PPH mixing tank can be divided into two forms: sloping bottom and flat bottom. The corrosion resistant container with full plastic structure is made of modified polypropylene laminate, pure polypropylene or glass fiber reinforced pure polypropylene through secondary processing. Select and configure motors, reducers, mixing paddles, heating devices, etc. according to the actual situation of customers. This product is corrosion resistant, scientific in design, reasonable in structure, excellent in performance, complete in specifications and patterns, safe and reliable in use. It is mainly applicable to the reaction kettle, which is widely used in the material reaction in the production of petroleum, chemical industry, rubber, pesticide, dye, medicine, food and other industries. PPH mixing tank product description: production process: PPH reaction kettle uses PPH spiral extrusion winding unit to process PPH granules into tank body forming process. The system adopts the process of hot melting PPH particles, extruding them, and then winding them onto steel dies to form cans. PPH reaction kettle has the characteristics of good integrity, uniform thickness, corrosion resistance, seamless, aging resistance and good leakage resistance. Application field: It is used in chemical industry, metallurgy, rare earth, electronics, dyes, pigments, dyes, environmental protection, pharmaceuticals, power plants, brewing and other industries. Material used: PPH. Product specification: can be customized according to customer requirements.
