Yibin PPH winding tank price

The production method of PPH storage tank is one-time forming coiling method, so its structure is relatively simple and its application is relatively convenient. PPH extrusion winding seamless plastic anti-corrosion equipment, polypropylene storage tank, polypropylene reactor, waste gas absorption tower, washing tower, storage tank and other plastic anti-corrosion equipment. As a new type of high-quality product, what are the main technical characteristics of PPH storage tank? Chemical resistance: among all polypropylene pipes, the experiment proves that PPH pipe has strong chemical resistance; Long service life: PPH pipe has longer service life and higher system safety; Impact strength: Compared with traditional PPH pipe, PPH pipe has significant low-temperature impact strength; Internal and external anti-corrosion: It has the characteristics of internal and external anti-corrosion, and can be placed in a highly corrosive environment; High performance: good performance of PH pipe, flexible welding equipment and special technical support team can not only guarantee（ β)- The welding installation quality of PP-H pipe system can also provide customized processing of non-standard products for customers according to their needs.

Yibin PPH winding tank price

PPH storage tanks play an important role in people's life, but due to different areas and environments, PPH storage tanks are exposed to different sunlight intensities. The intensity of sunlight will affect the service life of PPH storage tank to some extent, so attention should be paid to protecting PPH storage tank. During the use of PPH tank, if the indoor conditions are much better, but the PPH tank is used outdoors, in order to extend the service life of the tank, z can make a sunshade, and can also brush the appearance of the tank on a layer of light paint a year. In this way, the heat absorption and UV resistance can be reduced, and the anti-aging ability of the PPH tank can be improved. In addition, the strength of PPH storage tank service life has a certain impact on production costs and production benefits. Therefore, factors causing certain damage to PPH storage tank should be avoided during use, especially the sun protection of PPH storage tank.

Yibin PPH winding tank price

The small softening point of PPH storage tank is 108 ℃, and the large fragmentation point is - 70 ℃, so PP storage tank can generally be used to hold liquid with temperature ranging from - 40 ℃ to 60 ℃. The feed inlet, discharge outlet, liquid level gauge outlet, flange, etc. on the PPH storage tank body are all integrally formed and welded at one time, without additional feed inlet and outlet. When containing acid-base substances, acid-base resistant gaskets shall be provided. When organic substances (especially organic solvents) are contained, insoluble rubber gaskets shall be provided. PPH storage tank is made of polypropylene, which can contain inorganic acids, malic acid, salts, ammonium, alkalis, oils and most gaseous organic substances at normal temperature and pressure. PPH storage tank cannot be used to contain strong oxidants, such as concentrated sulfuric acid, concentrated nitric acid, etc. When using PPH storage tank, we should not forget that it is just a tool we use. If the tool is not used properly, it will also break down. Therefore, why we use PPH storage tank with different life depends on how we treat them.

Yibin PPH winding tank price

The reason why the price of PPH storage tank is higher than that of PP storage tank. The production process is different. PP storage tank is a kind of storage tank made by welding polypropylene plates, while PPH storage tank is made by processing PPH particles after physical treatment. The raw materials are different. The raw material of PPH storage tank is PPH granular material, and the raw material of PP storage tank is polypropylene plate. The cost of PPH granular material is higher than that of polypropylene plate; Due to different processing equipment, PPH storage tank needs to use steel mold for processing, and it needs to use natural gas for preheating before processing. The startup cost is high, and PP storage tank directly uses polypropylene plate to enter the tank, so the cost is low; The power consumption is different. The PPH storage tank needs to use electric heating to melt the granular materials out of the steel mold. The power consumption is large. The PP storage tank is only the welding gun of the electric welding point, and the power consumption is small; PPH storage tank needs to be cooled and then demoulded, which is carried out through electrical equipment rather than PP storage tank; PPH storage tank is welded with extrusion type large electric heating traction gun, which has high power consumption. PP storage tank is welded with manual small traction gun, which has low power consumption; The labor cost is different. PPH storage tank has less labor than PP storage tank, which is why many plastic storage tank manufacturers hope to develop PPH storage tank.

Yibin PPH winding tank price

Basic regulations for installation of PPH storage tank, service platform level and ability to withstand relative working pressure. If the steel frame structure is adopted, the gap should not be too large, and the wooden board or stainless steel plate should be laid. Check whether there are sharp objects such as steel nails on the wooden board to avoid damaging the storage tank or using concrete as the industrial foundation. Provisions for smooth leveling. Generally speaking, the mud road can be paved with blockboard to improve the compressive strength and working pressure. When organic chemicals are stored in PPH storage tank (first contact the manufacturer to order thickened storage tank), good outlet pipe trench and diluent equipment, or leakage alarm system shall be provided after the storage tank arrives at the site. It shall be provided around the site. When storing chemical liquid, first communicate with the manufacturer to determine the standard of storage tank, such as thickened storage tank. During operation, if PPH storage tank needs to be monitored, it can be monitored by level gauge or induction device. When it has been used for a long time, please refer to the storage requirements of PPH storage tank and clean the residual liquid in the tank in time.

Yibin PPH winding tank price

Welding technology of PPH storage tank. In terms of automatic welding equipment and welding materials for large storage tanks, the degree of localization is not high enough, especially the automatic welding wire matching the imported high-strength steel plate, which still depends on imports and has high prices. This is a problem that China's PPH storage tank manufacturers must solve in the future; The research and application history of submerged arc automatic transverse welding for flip chip storage tank is not long, and there are still many problems to be solved; There is no doubt that CO2 semi-automatic gas shielded welding technology has obvious advantages over traditional shielded metal arc welding, but there are still many problems to be solved if this method is to be widely popularized and applied outdoors. First, the auxiliary equipment should be portable and flexible, and the wiring should have sufficient length. According to different weldments or parts, corresponding wind proof auxiliary devices shall be developed. It can be predicted that the development trend of welding technology of pph tank manufacturers will have a good application prospect in the welding fields such as petrochemical industry; Gas shielded welding with flux cored wire will be the development direction of large pph tank manufacturers. In the welding of low-temperature storage tank, automatic welding is beneficial to ensure the stability of low-temperature impact performance of heat affected zone.