Huizhou PPH storage tank price
The storage tank is a new spiral wound disposable product with no welding cracks and better sealing performance. The thickness of PPH storage tank is not affected by the manufacturing materials. The external welding of PPH storage tank is a process that uses the imported automatic extrusion welding unit to make the large weld of the storage tank with high stress be welded in one time. The new PPH granular material with the same property as the tank body is hot melted at the large weld seam, and is integrated with the tank bottom and tank body. Welding process characteristics of PPH storage tank bottom: high mechanization and automation, stable product quality; The weld specifications can be designed according to the stress characteristics of the products, so as to give full play to the integrity of the weld; It can reduce flash, and the joints are smooth and beautiful.
Huizhou PPH storage tank price
Safety method for HDPE storage tank operation: When entering the construction site, workers shall wear safety helmets and fasten safety belts for high-altitude operation. Foam fire extinguishers and other fire-fighting equipment shall be placed separately on site. In case of any abnormal phenomenon during the pressure test of HDPE storage tank, it is strictly prohibited to operate under pressure. If there is abnormal movement of rh during commissioning, it shall be parked for inspection. When installing HDPE storage tanks, special personnel shall be assigned to command the lifting and commissioning, and multiple command is prohibited. When lifting HDPE storage tanks, irrelevant personnel are not allowed to enter the site. When lifting heavy objects, the rh person shall not stand below, and the construction site shall be provided with a protective fence. Construction power needs to be connected by special electricians, and non special electricians are not allowed to connect. The construction site is an extension of the factory area. It is forbidden to hit other equipment and process pipes during construction. The original pipes or equipment shall be drilled and approved before construction. HDPE tanks are widely used because of their superior performance. While focusing on personal safety, everyone can increase efficiency and product value through safety measures. The above is about the safety method of HDPE storage tank operation. You can understand that good results can be achieved only by following the correct operation method in the use process.
Huizhou PPH storage tank price
Welding technology of PPH storage tank. In terms of automatic welding equipment and welding materials for large storage tanks, the degree of localization is not high enough, especially the automatic welding wire matching the imported high-strength steel plate, which still depends on imports and has high prices. This is a problem that China's PPH storage tank manufacturers must solve in the future; The research and application history of submerged arc automatic transverse welding for flip chip storage tank is not long, and there are still many problems to be solved; There is no doubt that CO2 semi-automatic gas shielded welding technology has obvious advantages over traditional shielded metal arc welding, but there are still many problems to be solved if this method is to be widely popularized and applied outdoors. First, the auxiliary equipment should be portable and flexible, and the wiring should have sufficient length. According to different weldments or parts, corresponding wind proof auxiliary devices shall be developed. It can be predicted that the development trend of welding technology of pph tank manufacturers will have a good application prospect in the welding fields such as petrochemical industry; Gas shielded welding with flux cored wire will be the development direction of large pph tank manufacturers. In the welding of low-temperature storage tank, automatic welding is beneficial to ensure the stability of low-temperature impact performance of heat affected zone.
Huizhou PPH storage tank price
Pph storage tank is a kind of plastic container made by rotational molding process. it has become the equipment needed for chemical industry, smelting, mining and new materials. Do you know what problems should be paid attention to during the installation and use of pph storage tank? The platform for installing pph storage tank shall be able to bear the weight of storage tank and solution. The platform shall be flat and smooth to prevent some sharp objects from damaging the storage tank. If heavy additional equipment is installed on the tank, or if a person needs to work on the top of the tank but the tank cannot bear the weight of a person, support or related equipment should be used to assist in the operation. When the liquid inlet is higher than the tank bottom, the liquid inlet shall bend towards the tank wall to let the incoming liquid flow along the tank wall, so as to reduce the direct impact of liquid on the tank bottom. When storing chemical liquids, first communicate with the manufacturer to determine the specifications of storage tanks, such as thickened storage tanks. In use, if pph storage tank needs to be monitored, it can be monitored by level gauge or induction device. When it has been used for a long time, please refer to the storage requirements of pph storage tank and clean the residual liquid in the tank in time. If a large amount of liquid is sucked in and discharged from the pph storage tank, special technicians need to be arranged to install the corresponding exhaust pipe.
