Dazhou PPH winding tank manufacturer

PPH storage tank is also a polypropylene storage tank. Polypropylene can be divided into many types, and PPH is only one of them. PPH storage tank has great advantages in strength, acid and alkali resistance, aging resistance and appearance. The plastic storage tank is made of polypropylene (PP), reinforced polypropylene (PPH) and other raw materials, and is integrally molded by a special rotational molding process. There are no welding, no leakage, light weight, aging resistance, impact resistance, corrosion resistance, and long service life. So there is only one letter difference between PPH storage tank and PP storage tank. Is there any relationship between them? Don't tell me, there are really connections and differences. Let's get to know. PPH storage tank is formed by using alloy polypropylene technology at one time, but PP storage tank is rolled with polypropylene sheet, so its anti-corrosion performance will be much lower. PPH storage tank is more resistant to temperature than ordinary polypropylene, and can resist the erosion of strong chemicals. In addition, the properties of PP material and PPH material are similar, acid and alkali resistant and corrosion resistant. PPH storage tank is more expensive than PP storage tank. The plastic storage tank has great performance in terms of performance and is relatively durable. To some extent, it is a kind of tank that cannot be replaced by ordinary storage tanks.

Dazhou PPH winding tank manufacturer

Pph storage tank is a kind of plastic container made by rotational molding process. it has become the equipment needed for chemical industry, smelting, mining and new materials. Do you know what problems should be paid attention to during the installation and use of pph storage tank? The platform for installing pph storage tank shall be able to bear the weight of storage tank and solution. The platform shall be flat and smooth to prevent some sharp objects from damaging the storage tank. If heavy additional equipment is installed on the tank, or if a person needs to work on the top of the tank but the tank cannot bear the weight of a person, support or related equipment should be used to assist in the operation. When the liquid inlet is higher than the tank bottom, the liquid inlet shall bend towards the tank wall to let the incoming liquid flow along the tank wall, so as to reduce the direct impact of liquid on the tank bottom. When storing chemical liquids, first communicate with the manufacturer to determine the specifications of storage tanks, such as thickened storage tanks. In use, if pph storage tank needs to be monitored, it can be monitored by level gauge or induction device. When it has been used for a long time, please refer to the storage requirements of pph storage tank and clean the residual liquid in the tank in time. If a large amount of liquid is sucked in and discharged from the pph storage tank, special technicians need to be arranged to install the corresponding exhaust pipe.

Dazhou PPH winding tank manufacturer

In the case of selecting the form of HDPE storage tank, it must still be determined according to the requirements, and it can perform well in terms of quality. Fortunately, superior product quality is certainly a basis for recognition. The better the product is, the more popular it will be. Its characteristics in all aspects are better, which is also a key to the requirements of industrial production and application. Products with good reputation will be more reassuring, so that they can be better in service level. If they are better in service level, they must be a basis for seeking good results, and then they can benefit from good product quality. Because there are many specifications of products, in order to meet the application requirements of different occasions, it is still necessary to select products based on actual requirements. In addition, HDPE tank repair can be made of polymer composite materials. The leakage test or hydraulic test shall be carried out after the bucket is repaired or replaced according to the internal and external inspection regulations.

Dazhou PPH winding tank manufacturer

The main contents of cleaning the HDPE storage tank are as follows: at the end of each manufacturing, clean the surface of the HDPE container with fingers, and continuously clean the outside of the mechanical equipment with a large amount of water. Damage to the thermal insulation layer is strictly prohibited. According to the processing technology, the solution can be cleaned after a certain period of time. For a long time, more than 72 hours, machines and equipment should be cleaned again before class. It is forbidden to enter acid liquor into the bobbin of this commodity. If the cleaning box requires acid, do not use acid with pH<2. Once the acid enters the casing of this mechanical equipment, hydrogen effect will occur, and the surface will fall like a fish scale on a large scale. The general cleaning cylinder uses 2% of sodium hypochlorite solution and uses tap water to clean the cylinder. The HDPE tank shall be cleaned according to the requirements of Chinese standards. When entering the machine and equipment for cleaning, the water bottle should be padded at the bottom of the sponge pad to prevent special tools from falling in. Wear rubber shoes to prevent damage to the laminated glass. To sort out the actual staff, the records must be sorted out immediately to determine the work experience and the inspection and signature of the project.

Dazhou PPH winding tank manufacturer

PPH mixing tank is made by seamless extrusion winding technology. Pipe orifice, inner weld and outer weld are all processed by automatic extrusion unit equipment, which is superior, stronger and lower than plastic tanks made by traditional technology. It is necessary to use electric heating to melt and extrude the particles onto the steel mold, which consumes a lot of power. The PP storage tank only has the power of the welding gun, so it consumes less power; The PPH mixing tank is welded with a large extrusion electric heating drag gun, which consumes a lot of power. The PP storage tank uses a small manual drag gun, which consumes less power. PPH reaction kettle uses PPH spiral extrusion and winding unit to process PPH granules into tank body forming process. The system adopts the process of hot melting PPH particles, extruding them, and then winding them onto steel dies to form cans. PPH reaction kettle has the characteristics of good integrity, uniform thickness, corrosion resistance, seamless, aging resistance and good leakage resistance.