Article publishing
Home page > Article publishing > Chaozhou PPH storage tank manufacturer

Chaozhou PPH storage tank manufacturer

Release time: 2023-11-01 01:30:17
 Chaozhou PPH storage tank manufacturer

Chaozhou PPH storage tank manufacturer

PPH storage tank is also a polypropylene storage tank. Polypropylene can be divided into many types, and PPH is only one of them. PPH storage tank has great advantages in strength, acid and alkali resistance, aging resistance and appearance. The plastic storage tank is made of polypropylene (PP), reinforced polypropylene (PPH) and other raw materials, and is integrally molded by a special rotational molding process. There are no welding, no leakage, light weight, aging resistance, impact resistance, corrosion resistance, and long service life. So there is only one letter difference between PPH storage tank and PP storage tank. Is there any relationship between them? Don't tell me, there are really connections and differences. Let's get to know. PPH storage tank is formed by using alloy polypropylene technology at one time, but PP storage tank is rolled with polypropylene sheet, so its anti-corrosion performance will be much lower. PPH storage tank is more resistant to temperature than ordinary polypropylene, and can resist the erosion of strong chemicals. In addition, the properties of PP material and PPH material are similar, acid and alkali resistant and corrosion resistant. PPH storage tank is more expensive than PP storage tank. The plastic storage tank has great performance in terms of performance and is relatively durable. To some extent, it is a kind of tank that cannot be replaced by ordinary storage tanks.

 Chaozhou PPH storage tank manufacturer

Chaozhou PPH storage tank manufacturer

Safety method for HDPE storage tank operation: When entering the construction site, workers shall wear safety helmets and fasten safety belts for high-altitude operation. Foam fire extinguishers and other fire-fighting equipment shall be placed separately on site. In case of any abnormal phenomenon during the pressure test of HDPE storage tank, it is strictly prohibited to operate under pressure. If there is abnormal movement of rh during commissioning, it shall be parked for inspection. When installing HDPE storage tanks, special personnel shall be assigned to command the lifting and commissioning, and multiple command is prohibited. When lifting HDPE storage tanks, irrelevant personnel are not allowed to enter the site. When lifting heavy objects, the rh person shall not stand below, and the construction site shall be provided with a protective fence. Construction power needs to be connected by special electricians, and non special electricians are not allowed to connect. The construction site is an extension of the factory area. It is forbidden to hit other equipment and process pipes during construction. The original pipes or equipment shall be drilled and approved before construction. HDPE tanks are widely used because of their superior performance. While focusing on personal safety, everyone can increase efficiency and product value through safety measures. The above is about the safety method of HDPE storage tank operation. You can understand that good results can be achieved only by following the correct operation method in the use process.

 Chaozhou PPH storage tank manufacturer

Chaozhou PPH storage tank manufacturer

When PPH storage tank is used, the filling rate shall not be greater than 95%, and excessive filling is strictly prohibited. Made of polypropylene, it can contain inorganic acid, malic acid, salt, ammonium, alkali, oil and most gaseous compounds under normal temperature and pressure; The lower cracking temperature and dissolution temperature of PPH storage tank are - 70 ℃ to 108 ℃, and the temperature of the liquid contained is usually between - 40 ℃ and 60 ℃; The filling rate of PPH storage tank shall not be greater than 95% when it is used, and excessive filling is strictly prohibited; When the valves, instruments, pipes, etc. on the equipment are frozen, nitrogen, air or hot water at 70~80 ℃ shall be used for thawing, and open fire heating is strictly prohibited; The PPH storage tank shall be equipped with acid and alkali resistant gaskets when containing acid and alkali liquids, and insoluble rubber gaskets when containing organic solvents; If you are not sure whether you can contain the required substances, you can consult our technical personnel, and if necessary, you can carry out the tank material sample soaking test.

 Chaozhou PPH storage tank manufacturer

Chaozhou PPH storage tank manufacturer

PPH mixing tank can be divided into two forms: sloping bottom and flat bottom. The corrosion resistant container with full plastic structure is made of modified polypropylene laminate, pure polypropylene or glass fiber reinforced pure polypropylene through secondary processing. Select and configure motors, reducers, mixing paddles, heating devices, etc. according to the actual situation of customers. This product is corrosion resistant, scientific in design, reasonable in structure, excellent in performance, complete in specifications and patterns, safe and reliable in use. It is mainly applicable to the reaction kettle, which is widely used in the material reaction in the production of petroleum, chemical industry, rubber, pesticide, dye, medicine, food and other industries. PPH mixing tank product description: production process: PPH reaction kettle uses PPH spiral extrusion winding unit to process PPH granules into tank body forming process. The system adopts the process of hot melting PPH particles, extruding them, and then winding them onto steel dies to form cans. PPH reaction kettle has the characteristics of good integrity, uniform thickness, corrosion resistance, seamless, aging resistance and good leakage resistance. Application field: It is used in chemical industry, metallurgy, rare earth, electronics, dyes, pigments, dyes, environmental protection, pharmaceuticals, power plants, brewing and other industries. Material used: PPH. Product specification: can be customized according to customer requirements.

 Chaozhou PPH storage tank manufacturer

Chaozhou PPH storage tank manufacturer

The forming process of PPH storage tank adopts spiral extrusion winding technology with reliable quality. The main processes include tank extrusion winding, external welding, internal seam welding, pipe orifice installation, etc. Can body extrusion winding is the process of using PPH spiral extrusion winding unit to process PPH granules into can body molding. The system adopts the process of hot melting PPH particles, extruding them, and then winding them onto steel dies to form cans. The production efficiency of this process is about 5-8 times higher than that of manual process, and the product is flat and beautiful, with good integrity, no joints, good corrosion resistance and leakage resistance. The tank body is thin at the top and thick at the bottom, and the size and shape of the product are not limited. External welding is the process of using the imported automatic extrusion welding unit to make the large weld of the tank with large stress be welded in one time. The new PPH granular material with the same property as the tank body is hot melted at the large weld seam, and is integrated with the tank bottom and tank body. The process features high mechanization and automation, and stable product quality. The weld specifications can be designed according to the stress characteristics of the product to give full play to the integrity of the weld, reduce flash, and make the joint smooth and beautiful. In addition, the ultraviolet absorber is added to PPH granular material to resist aging and extend the service life.