Xiaogan PPH reactor manufacturer
The forming process of PPH storage tank adopts spiral extrusion winding technology with reliable quality. The main processes include tank extrusion winding, external welding, internal seam welding, pipe orifice installation, etc. Can body extrusion winding is the process of using PPH spiral extrusion winding unit to process PPH granules into can body molding. The system adopts the process of hot melting PPH particles, extruding them, and then winding them onto steel dies to form cans. The production efficiency of this process is about 5-8 times higher than that of manual process, and the product is flat and beautiful, with good integrity, no joints, good corrosion resistance and leakage resistance. The tank body is thin at the top and thick at the bottom, and the size and shape of the product are not limited. External welding is the process of using the imported automatic extrusion welding unit to make the large weld of the tank with large stress be welded in one time. The new PPH granular material with the same property as the tank body is hot melted at the large weld seam, and is integrated with the tank bottom and tank body. The process features high mechanization and automation, and stable product quality. The weld specifications can be designed according to the stress characteristics of the product to give full play to the integrity of the weld, reduce flash, and make the joint smooth and beautiful. In addition, the ultraviolet absorber is added to PPH granular material to resist aging and extend the service life.
Xiaogan PPH reactor manufacturer
In the case of selecting the form of HDPE storage tank, it must still be determined according to the requirements, and it can perform well in terms of quality. Fortunately, superior product quality is certainly a basis for recognition. The better the product is, the more popular it will be. Its characteristics in all aspects are better, which is also a key to the requirements of industrial production and application. Products with good reputation will be more reassuring, so that they can be better in service level. If they are better in service level, they must be a basis for seeking good results, and then they can benefit from good product quality. Because there are many specifications of products, in order to meet the application requirements of different occasions, it is still necessary to select products based on actual requirements. In addition, HDPE tank repair can be made of polymer composite materials. The leakage test or hydraulic test shall be carried out after the bucket is repaired or replaced according to the internal and external inspection regulations.
Xiaogan PPH reactor manufacturer
For the treatment of corrosive gases (such as acid and alkaline waste gas) in PPH waste gas tower, liquid absorption method is often used. The key to control the waste gas by liquid absorption is the selection of purification equipment. The main development is acid and alkaline waste gas purification process and equipment with high purification efficiency, simple operation and management, and long service life. This process and product are characterized by simple structure, low energy consumption, high purification efficiency and wide application range, and can effectively remove water-soluble gases such as hydrogen chloride (HCl), hydrogen fluoride (HF), ammonia (NH3), sulfuric acid mist (H2SO4), chromic acid mist (CrO3), cyanuric acid gas (HCN), alkali vapor (NaOH), hydrogen sulfide gas (H2S), formalin (HCHO), etc. The acid mist waste gas is introduced into the purification tower through the air duct. After passing through the packing layer, the waste gas and sodium hydride absorption liquid are fully contacted, absorbed and neutralized by gas-liquid two-phase reaction. After purification, the acid mist waste gas is dewatered and defogged by the demister, and then discharged into the atmosphere by the fan. The absorption liquid is sprayed down from the tower top after being pressurized by the water pump at the tower bottom, and then flows back to the tower bottom for recycling.
Xiaogan PPH reactor manufacturer
PPH winding tank is a plastic tank with good development prospects at present. Its advantage is that the change of processing technology makes it outstanding in the tank. PPH storage tank body uses PPH particulate raw materials to melt with a screw extruder, and then the molten extrusion raw materials produce the tank body on the grinding tool. After a certain level of temperature is reduced, the molding can ensure the integrity of the tank body. Internal welding process features: high mechanization and automation, and stable product quality. The weld specifications can be designed according to the stress characteristics of the product, so as to give full play to the integrity of the weld. The product has good integrity, the weld is integrated with the parent body, and has good corrosion resistance and leakage resistance. It can reduce flash, and the joints are smooth and beautiful. UV absorber is added to PPH granules to prevent aging and prolong service life.
Xiaogan PPH reactor manufacturer
Welding technology of PPH storage tank. In terms of automatic welding equipment and welding materials for large storage tanks, the degree of localization is not high enough, especially the automatic welding wire matching the imported high-strength steel plate, which still depends on imports and has high prices. This is a problem that China's PPH storage tank manufacturers must solve in the future; The research and application history of submerged arc automatic transverse welding for flip chip storage tank is not long, and there are still many problems to be solved; There is no doubt that CO2 semi-automatic gas shielded welding technology has obvious advantages over traditional shielded metal arc welding, but there are still many problems to be solved if this method is to be widely popularized and applied outdoors. First, the auxiliary equipment should be portable and flexible, and the wiring should have sufficient length. According to different weldments or parts, corresponding wind proof auxiliary devices shall be developed. It can be predicted that the development trend of welding technology of pph tank manufacturers will have a good application prospect in the welding fields such as petrochemical industry; Gas shielded welding with flux cored wire will be the development direction of large pph tank manufacturers. In the welding of low-temperature storage tank, automatic welding is beneficial to ensure the stability of low-temperature impact performance of heat affected zone.
Xiaogan PPH reactor manufacturer
The internal welding of PPH storage tank is an automatic long arm extrusion welding process, which is an important step in all processes. The new PPH granular material with the same nature as the tank body is hot melted at the internal weld seam, and is integrated with the tank bottom and tank body. The principle is the same as that of external welding, but its equipment is different. Internal welding process characteristics of PPH storage tank: high mechanization and automation, stable product quality; The weld specifications can be designed according to the stress characteristics of the products, so as to give full play to the integrity of the weld; The product has good integrity, the weld is integrated with the parent body, and has good corrosion resistance and leakage resistance; It can reduce flash, and the joints are smooth and beautiful. UV absorber is added to PPH granules to prevent aging and prolong service life.
