Mianyang PPH reactor price
PPH winding tank is a plastic tank with good development prospects at present. Its advantage is that the change of processing technology makes it outstanding in the tank. PPH storage tank body uses PPH particulate raw materials to melt with a screw extruder, and then the molten extrusion raw materials produce the tank body on the grinding tool. After a certain level of temperature is reduced, the molding can ensure the integrity of the tank body. Internal welding process features: high mechanization and automation, and stable product quality. The weld specifications can be designed according to the stress characteristics of the product, so as to give full play to the integrity of the weld. The product has good integrity, the weld is integrated with the parent body, and has good corrosion resistance and leakage resistance. It can reduce flash, and the joints are smooth and beautiful. UV absorber is added to PPH granules to prevent aging and prolong service life.
Mianyang PPH reactor price
The main purpose of the mixing tank is to mix, mix, blend and homogenize materials. Features: Convenient, convenient, time-saving, effectively shortens the mixing time, saves labor, and speeds up production. It is the main equipment for modern industrial production. PPH mixing tank uses PPH spiral extrusion winding unit to process PPH granules into tank body molding process. The system adopts the process of hot melting PPH particles, extruding them, and then winding them onto steel dies to form cans. PPH mixing tank is characterized by good integrity, uniform thickness, corrosion resistance, seam free, aging resistance and good leakage resistance. This product is widely used in chemical industry, metallurgy, rare earth, electronics, dyes, pigments, dyes, environmental protection, pharmaceuticals, power plants, brewing and other industries.
Mianyang PPH reactor price
The main contents of cleaning the HDPE storage tank are as follows: at the end of each manufacturing, clean the surface of the HDPE container with fingers, and continuously clean the outside of the mechanical equipment with a large amount of water. Damage to the thermal insulation layer is strictly prohibited. According to the processing technology, the solution can be cleaned after a certain period of time. For a long time, more than 72 hours, machines and equipment should be cleaned again before class. It is forbidden to enter acid liquor into the bobbin of this commodity. If the cleaning box requires acid, do not use acid with pH<2. Once the acid enters the casing of this mechanical equipment, hydrogen effect will occur, and the surface will fall like a fish scale on a large scale. The general cleaning cylinder uses 2% of sodium hypochlorite solution and uses tap water to clean the cylinder. The HDPE tank shall be cleaned according to the requirements of Chinese standards. When entering the machine and equipment for cleaning, the water bottle should be padded at the bottom of the sponge pad to prevent special tools from falling in. Wear rubber shoes to prevent damage to the laminated glass. To sort out the actual staff, the records must be sorted out immediately to determine the work experience and the inspection and signature of the project.
Mianyang PPH reactor price
The working principle of PPH waste gas tower is to separate the pollutants in the gas and convert them into harmless substances to purify the gas. It belongs to differential contact countercurrent type. The packing in the tower body is the basic component of gas-liquid two-phase contact. After the gas outside the tower body enters the tower body, the gas enters the packing layer. On the packing layer, there is spray liquid from the top and spray liquid in front, and a layer of liquid film is formed on the packing. When the gas flows through the packing gap, it contacts with the packing liquid film for absorption or comprehensive reaction, The packing layer can provide sufficient surface area without causing excessive resistance to the gas flow. The absorbed or integrated gas is collected by the demister and discharged out of the tower through the air outlet.
Mianyang PPH reactor price
PPH storage tank is more advanced in materials and processing technology than polypropylene storage tank, but this will not lead to the price of the former being significantly higher than the latter, which is mainly due to the removal of intermediate profits and labor saving in the intermediate plate link. The whole tank body is thin and thick, so that the whole cylinder body is evenly stressed, the design is reasonable, and the mechanical strength and safety reliability of the tank body are guaranteed. In addition to being able to safely fill various corrosive liquids and having good sealing performance, the tank is light in weight and clean in appearance, and has more reliable advantages than plastic roll forming technology, plastic plate welding, FRP roll, hand glue technology, carbon steel lining technology and other technologies. The welding of the bottom of the tank and the bottom of the tank is the part that bears the large stress z. The internal and bottom of the tank are welded by mechanical cantilever, which can realize the large welding once without repeated welding, ensure that the tank and the tank will not leak under the rh condition, and can safely withstand various corrosive liquid operations.
