Liupanshui PPH Reactor Company
HDPE storage tank is used as a sealed vessel for storing liquid or gas, which is called storage tank. The construction of HDPE storage tank project is an indispensable and vital infrastructure construction for oil and gas, chemical industry, grain, oil and food, food factory, fire safety, transportation, metallurgy industry, national defense safety and other professions. Because the area and environment of use are different, the intensity of sunlight is also different. The intensity of sunlight will have a certain impact on the service life of HDPE storage tanks, so sunscreen is also part of daily maintenance, which can extend the service life and reduce daily wear and tear. In the application process of HDPE storage tank, if conditions permit, it can be placed indoors, which can effectively avoid the problem of sunscreen. However, if the HDPE storage tank is placed outdoors, it must be maintained if it is exposed to wind and rain. Make a sunshade to prevent direct sunlight. The other way is to apply a light color coating on the surface of HDPE storage tank to reduce heat absorption and resist ultraviolet rays, and also improve the aging resistance of HDPE storage tank. In use, factors that can cause certain damage should be avoided, especially the sunscreen problem of polypropylene storage tank.
Liupanshui PPH Reactor Company
PPH waste gas treatment tower is generally divided into cylindrical tower body or square tower body. The cylindrical tower body is generally vertical tower, and the square tower body is generally horizontal tower. There are multi-stage packing rings inside. During operation, the waste gas flows upward from the bottom of the tower. Due to tangential entry into the tower, especially the guiding effect of the packing layer, the flue gas rotates and rises, resulting in full contact between the packing layer and the waste gas, which sprays the downstream liquid into droplets, leaving a large contact area between gas and liquid; The liquid droplets will also be driven by the air flow to rotate, and the centrifugal force generated will strengthen the air contact at night. They will fall onto the tower wall and flow down along the wall, passing through the overflow device to the next layer of packing, and then the spray nozzle will atomize again for gas-liquid contact.
Liupanshui PPH Reactor Company
The key manufacturing method used in the production of PPH storage tank is one-time forming coiling manufacturing method, so it is simple in structure. The application of PPH storage tank is relatively convenient due to its simple construction. In the actual engineering construction and application, the vertical PPH storage tank usually only considers the static load due to the low application frequency, and the safety performance is slightly increased. For the vertical PPH storage tank with large capacity, the concrete rubber support and the metal rubber support can be considered, but the metal rubber support is too tightly bound, and the plastic has some folding and swelling, It will do harm to the compressive strength of the storage tank, and the appearance is not beautiful. It is proposed to use concrete rubber bearings. Second, for those with small capacity, it is OK to immediately consider plastic rubber bearings.
Liupanshui PPH Reactor Company
The performance characteristics of PPH storage tank are anti-corrosion and free of leakage. Easy to install, maintain and replace. Long service life, good sealing performance. High polymer plastic sliding roller can prevent the strip steel surface from being pulled during pickling. PPH storage tanks are commonly used for the storage and temporary storage of production materials in chemical, petroleum, medicine, food, grease, printing and dyeing, metallurgy, environmental protection, light industry and other industries. Because PPH storage tank has unique advantages over traditional anti-corrosion tank. Next, the advantages of PPH storage tank are introduced in detail. PPH storage tank has good integrity, no welding, no leakage, impact resistance, high tensile strength, good aging resistance, and meets the hygienic food standards. Due to the good performance of LLDPE and the special structure of polypropylene rolling tank, the service life of LLDPE can reach more than 15 years. Good chemical resistance. Except for some solutions that can make it expand, it can bear most of the material solutions. Polypropylene tank has the characteristics of internal and external anti-corrosion, and can be placed in a highly corrosive environment. Generally, the working conditions of storage tanks are atmospheric temperature and pressure; Under special circumstances, the working conditions of the storage tank can be lower than 70 ℃, and the hydraulic pressure can be less than 1 kg/cm2.
Liupanshui PPH Reactor Company
What are the advantages and features of PPH waste gas treatment spray tower: the process of PPH waste gas treatment spray tower is simple, the operating cost is low, the installation is convenient, and the corrosion resistance is good; The ppH waste gas treatment spray tower has stable performance and high purification efficiency; The ppH waste gas treatment spray tower is light in weight, convenient for installation, transportation and maintenance management; The ppH waste gas treatment spray tower is especially suitable for water-soluble dust laden gas; The internal spray of ppH waste gas treatment spray tower is uniform, and the gas-liquid contact area is large; PpH waste gas treatment spray tower has low noise, stable operation, simple operation and convenience; It is specially used for neutralizing acid and alkali gases produced by electroplating industry and Wuduo surface treatment. It adopts excellent PPH board, and the air volume can be adjusted randomly.
Liupanshui PPH Reactor Company
Physical anti-corrosion of PPH winding tank: during processing, appropriate oily film-forming agent is used in the mesh, so that the anti-corrosion effect of the produced equipment will be much better when it is used. For example, the use of some lead containing pigments and oil together can make the anti-corrosion coating more compact, which will also reduce the penetration of substances to the equipment. Phosphate pigments are basic acid salts that are difficult to dissolve after hydrolysis, which can effectively block the pinholes in the coating. The oxide produced by iron or the flake mica powder and other pigments can reduce the permeability of the anti-corrosion coating when filling, so the PPH winding tank can play a good role in anti-corrosion physically.
