Yangjiang PPH reactor installation
PPH tank body extrusion winding production tank body butt welding is the process of using PPH spiral extrusion winding unit to process PPH particles into tank body molding. The system adopts the process of hot melting PPH particles, extruding them, and then winding them onto steel dies to form cans. The production efficiency is 5-8 times higher than that of manual production. The product has good integrity, no seams, good corrosion resistance, good leakage resistance, flat and beautiful product, thin tank body and thick tank body, low price, unlimited product size and shape, and the product is processed with granular materials, with good anti-aging performance. Polypropylene tank itself has the advantage of internal and external anti-corrosion, so it can be stored in some highly corrosive environments. Because linear polyethylene is used, it has good service performance, and the special structure of polypropylene rolling tank is used, so the service life can basically reach more than 15 years. In addition, it can be used under normal atmospheric temperature and pressure when it is stored.
Yangjiang PPH reactor installation
Pph storage tank is a kind of plastic container made by rotational molding process. it has become the equipment needed for chemical industry, smelting, mining and new materials. Do you know what problems should be paid attention to during the installation and use of pph storage tank? The platform for installing pph storage tank shall be able to bear the weight of storage tank and solution. The platform shall be flat and smooth to prevent some sharp objects from damaging the storage tank. If heavy additional equipment is installed on the tank, or if a person needs to work on the top of the tank but the tank cannot bear the weight of a person, support or related equipment should be used to assist in the operation. When the liquid inlet is higher than the tank bottom, the liquid inlet shall bend towards the tank wall to let the incoming liquid flow along the tank wall, so as to reduce the direct impact of liquid on the tank bottom. When storing chemical liquids, first communicate with the manufacturer to determine the specifications of storage tanks, such as thickened storage tanks. In use, if pph storage tank needs to be monitored, it can be monitored by level gauge or induction device. When it has been used for a long time, please refer to the storage requirements of pph storage tank and clean the residual liquid in the tank in time. If a large amount of liquid is sucked in and discharged from the pph storage tank, special technicians need to be arranged to install the corresponding exhaust pipe.
Yangjiang PPH reactor installation
The main contents of cleaning the HDPE storage tank are as follows: at the end of each manufacturing, clean the surface of the HDPE container with fingers, and continuously clean the outside of the mechanical equipment with a large amount of water. Damage to the thermal insulation layer is strictly prohibited. According to the processing technology, the solution can be cleaned after a certain period of time. For a long time, more than 72 hours, machines and equipment should be cleaned again before class. It is forbidden to enter acid liquor into the bobbin of this commodity. If the cleaning box requires acid, do not use acid with pH<2. Once the acid enters the casing of this mechanical equipment, hydrogen effect will occur, and the surface will fall like a fish scale on a large scale. The general cleaning cylinder uses 2% of sodium hypochlorite solution and uses tap water to clean the cylinder. The HDPE tank shall be cleaned according to the requirements of Chinese standards. When entering the machine and equipment for cleaning, the water bottle should be padded at the bottom of the sponge pad to prevent special tools from falling in. Wear rubber shoes to prevent damage to the laminated glass. To sort out the actual staff, the records must be sorted out immediately to determine the work experience and the inspection and signature of the project.
Yangjiang PPH reactor installation
What are the advantages and features of PPH waste gas treatment spray tower: the process of PPH waste gas treatment spray tower is simple, the operating cost is low, the installation is convenient, and the corrosion resistance is good; The ppH waste gas treatment spray tower has stable performance and high purification efficiency; The ppH waste gas treatment spray tower is light in weight, convenient for installation, transportation and maintenance management; The ppH waste gas treatment spray tower is especially suitable for water-soluble dust laden gas; The internal spray of ppH waste gas treatment spray tower is uniform, and the gas-liquid contact area is large; PpH waste gas treatment spray tower has low noise, stable operation, simple operation and convenience; It is specially used for neutralizing acid and alkali gases produced by electroplating industry and Wuduo surface treatment. It adopts excellent PPH board, and the air volume can be adjusted randomly.
Yangjiang PPH reactor installation
PPH storage tank has the advantages of corrosion resistance, corrosion prevention, long service life, light self weight, high strength, safe transportation, convenient maintenance, etc. The working pressure of PPH storage tank is normal pressure, and the working temperature is PPH-10 ℃~120 ℃, and PVC-40 ℃~60 ℃. PPH storage tank has the advantages of one-step forming without welding joint, impact resistance, aging resistance, light weight, no leakage, acid and alkali resistance, long service life, and compliance with health standards. PPH storage tank has excellent chemical corrosion resistance, and has good corrosion resistance to inorganic acid, alkali and salt (except oxidizing media). Common PPH tank solutions include dilute sulfuric acid, hydrochloric acid, hydrofluoric acid, hydrogen peroxide, phosphoric acid, ammonia, etc. Rotational plastic anti-corrosion PP storage tank has great advantages in large size, large capacity and large volume products. Although the volume is large, it only maintains the characteristics of one-time molding integrity, which is beyond the reach of other storage tank processes. Compared with the traditional anti-corrosion storage tank, the price is low and the performance price ratio is high.
