Installation of Neijiang PPH storage tank
The main purpose of the mixing tank is to mix, mix, blend and homogenize materials. Features: Convenient, convenient, time-saving, effectively shortens the mixing time, saves labor, and speeds up production. It is the main equipment for modern industrial production. PPH mixing tank uses PPH spiral extrusion winding unit to process PPH granules into tank body molding process. The system adopts the process of hot melting PPH particles, extruding them, and then winding them onto steel dies to form cans. PPH mixing tank is characterized by good integrity, uniform thickness, corrosion resistance, seam free, aging resistance and good leakage resistance. This product is widely used in chemical industry, metallurgy, rare earth, electronics, dyes, pigments, dyes, environmental protection, pharmaceuticals, power plants, brewing and other industries.
Installation of Neijiang PPH storage tank
PPH mixing tank is made by seamless extrusion winding technology. Pipe orifice, inner weld and outer weld are all processed by automatic extrusion unit equipment, which is superior, stronger and lower than plastic tanks made by traditional technology. It is necessary to use electric heating to melt and extrude the particles onto the steel mold, which consumes a lot of power. The PP storage tank only has the power of the welding gun, so it consumes less power; The PPH mixing tank is welded with a large extrusion electric heating drag gun, which consumes a lot of power. The PP storage tank uses a small manual drag gun, which consumes less power. PPH reaction kettle uses PPH spiral extrusion and winding unit to process PPH granules into tank body forming process. The system adopts the process of hot melting PPH particles, extruding them, and then winding them onto steel dies to form cans. PPH reaction kettle has the characteristics of good integrity, uniform thickness, corrosion resistance, seamless, aging resistance and good leakage resistance.
Installation of Neijiang PPH storage tank
The thickness requirements for the bottom plate and top plate of PPH storage tank, the previous welding process is to use a portable welding gun to melt the welding rod, and then weld the tank body and bottom plate together. Since the welding rod is an external accessory, it cannot guarantee the consistency of the material with the bottom plate and tank body, which has a certain impact on the quality of equipment. Using a portable welding gun to weld, it cannot achieve the same welding strength, and the weld surface is uneven, There are many hidden dangers for equipment leakage. The bottom plate and can body are welded by mechanical welding process, which can be divided into external welding and internal welding. The external welding of PPH storage tank is a process that uses the imported automatic extrusion welding unit to realize the one-time welding molding of large welds at the stressed parts of the storage tank. The new PPH granular material with the same property as the tank body is hot melted at the large weld seam, and is integrated with the tank bottom and tank body. Internal welding is an automatic long arm extrusion welding process, which is an important step in all processes. Its principle is the same as external welding, but its equipment is different.
Installation of Neijiang PPH storage tank
PPH storage tank is resistant to most acids, alkalis, organics, and mixed liquids. As long as the operating temperature is within the limited range, there will be no corrosion. Many media that PPH storage tank can resist will corrode stainless steel (special stainless steel is outside); In terms of protection, PPH storage tank is simple in protection and tools, and the manufacturer can handle it by himself; The operation temperature of dangerous chemicals is generally normal temperature, and the high operation temperature of PPH storage tank can reach 100 ℃. PPH storage tank has become a necessary equipment for chemical industry, smelting, rare earth, mining, pigment, printing and dyeing, new data, new energy, biomedicine, and even some professions have changed some stainless steel reaction kettles with normal temperature and pressure into reaction kettles made of PPH raw materials.
Installation of Neijiang PPH storage tank
Pph storage tank is a kind of plastic container made by rotational molding process. it has become the equipment needed for chemical industry, smelting, mining and new materials. Do you know what problems should be paid attention to during the installation and use of pph storage tank? The platform for installing pph storage tank shall be able to bear the weight of storage tank and solution. The platform shall be flat and smooth to prevent some sharp objects from damaging the storage tank. If heavy additional equipment is installed on the tank, or if a person needs to work on the top of the tank but the tank cannot bear the weight of a person, support or related equipment should be used to assist in the operation. When the liquid inlet is higher than the tank bottom, the liquid inlet shall bend towards the tank wall to let the incoming liquid flow along the tank wall, so as to reduce the direct impact of liquid on the tank bottom. When storing chemical liquids, first communicate with the manufacturer to determine the specifications of storage tanks, such as thickened storage tanks. In use, if pph storage tank needs to be monitored, it can be monitored by level gauge or induction device. When it has been used for a long time, please refer to the storage requirements of pph storage tank and clean the residual liquid in the tank in time. If a large amount of liquid is sucked in and discharged from the pph storage tank, special technicians need to be arranged to install the corresponding exhaust pipe.
