Anshun PPH Storage Tank Company
The key manufacturing method used in the production of PPH storage tank is one-time forming coiling manufacturing method, so it is simple in structure. The application of PPH storage tank is relatively convenient due to its simple construction. When the rubber bearing is a plastic rubber bearing, the compressive strength, stiffness, service life and total number of manufacturing shall be considered. When the rubber bearing is a metal rubber bearing, the other standards shall be the same as 1. In addition, the surface of metal rubber bearing shall be corrosion resistant. When the rubber bearing is a concrete rubber bearing, the concrete rubber bearing of the first horizontal tank shall consider the compression strength provisions, and the total number of rubber bearings shall be 2. When there are several rubber bearings, their design elevation shall be the same, and there is no need for uneven ground settlement, and the bottom shall be basically flat.
Anshun PPH Storage Tank Company
What are the anti-corrosion treatment of PPH storage tank? For PPH storage tanks storing oil and product oil, since the performance required by the anti-corrosion materials in PPH storage tanks is electrostatic conduction, all PPH storage tanks shall be subject to anti-corrosion treatment with electrostatic conduction coating. The treatment of the external anti-corrosion coating of the tank is a comprehensive treatment that takes into account the anti-corrosion performance, weather resistance and aesthetic performance of the tank. In the design of anti-corrosion coating for PPH storage tank, it is necessary to consider that each anti-corrosion coating has temperature resistance and compatibility. If the alkyd anti-corrosion coating is used, it is necessary to avoid direct matching, because it will react with zinc powder. The cathodic corrosion protection of the tank is divided into impressed current cathodic protection on the outside of the bottom plate of the tank, and protective treatment on the anode of the ponding layer in the tank.
Anshun PPH Storage Tank Company
The forming process of PPH storage tank adopts spiral extrusion winding technology with reliable quality. The main processes include tank extrusion winding, external welding, internal seam welding, pipe orifice installation, etc. Can body extrusion winding is the process of using PPH spiral extrusion winding unit to process PPH granules into can body molding. The system adopts the process of hot melting PPH particles, extruding them, and then winding them onto steel dies to form cans. The production efficiency of this process is about 5-8 times higher than that of manual process, and the product is flat and beautiful, with good integrity, no joints, good corrosion resistance and leakage resistance. The tank body is thin at the top and thick at the bottom, and the size and shape of the product are not limited. External welding is the process of using the imported automatic extrusion welding unit to make the large weld of the tank with large stress be welded in one time. The new PPH granular material with the same property as the tank body is hot melted at the large weld seam, and is integrated with the tank bottom and tank body. The process features high mechanization and automation, and stable product quality. The weld specifications can be designed according to the stress characteristics of the product to give full play to the integrity of the weld, reduce flash, and make the joint smooth and beautiful. In addition, the ultraviolet absorber is added to PPH granular material to resist aging and extend the service life.
Anshun PPH Storage Tank Company
The storage tank is a new spiral wound disposable product with no welding cracks and better sealing performance. The thickness of PPH storage tank is not affected by the manufacturing materials. The external welding of PPH storage tank is a process that uses the imported automatic extrusion welding unit to make the large weld of the storage tank with high stress be welded in one time. The new PPH granular material with the same property as the tank body is hot melted at the large weld seam, and is integrated with the tank bottom and tank body. Welding process characteristics of PPH storage tank bottom: high mechanization and automation, stable product quality; The weld specifications can be designed according to the stress characteristics of the products, so as to give full play to the integrity of the weld; It can reduce flash, and the joints are smooth and beautiful.
