Hechi PPH reactor manufacturer
Pph storage tank is a kind of plastic container made by rotational molding process. it has become the equipment needed for chemical industry, smelting, mining and new materials. Do you know what problems should be paid attention to during the installation and use of pph storage tank? The platform for installing pph storage tank shall be able to bear the weight of storage tank and solution. The platform shall be flat and smooth to prevent some sharp objects from damaging the storage tank. If heavy additional equipment is installed on the tank, or if a person needs to work on the top of the tank but the tank cannot bear the weight of a person, support or related equipment should be used to assist in the operation. When the liquid inlet is higher than the tank bottom, the liquid inlet shall bend towards the tank wall to let the incoming liquid flow along the tank wall, so as to reduce the direct impact of liquid on the tank bottom. When storing chemical liquids, first communicate with the manufacturer to determine the specifications of storage tanks, such as thickened storage tanks. In use, if pph storage tank needs to be monitored, it can be monitored by level gauge or induction device. When it has been used for a long time, please refer to the storage requirements of pph storage tank and clean the residual liquid in the tank in time. If a large amount of liquid is sucked in and discharged from the pph storage tank, special technicians need to be arranged to install the corresponding exhaust pipe.
Hechi PPH reactor manufacturer
Basic regulations for installation of PPH storage tank, service platform level and ability to withstand relative working pressure. If the steel frame structure is adopted, the gap should not be too large, and the wooden board or stainless steel plate should be laid. Check whether there are sharp objects such as steel nails on the wooden board to avoid damaging the storage tank or using concrete as the industrial foundation. Provisions for smooth leveling. Generally speaking, the mud road can be paved with blockboard to improve the compressive strength and working pressure. When organic chemicals are stored in PPH storage tank (first contact the manufacturer to order thickened storage tank), good outlet pipe trench and diluent equipment, or leakage alarm system shall be provided after the storage tank arrives at the site. It shall be provided around the site. When storing chemical liquid, first communicate with the manufacturer to determine the standard of storage tank, such as thickened storage tank. During operation, if PPH storage tank needs to be monitored, it can be monitored by level gauge or induction device. When it has been used for a long time, please refer to the storage requirements of PPH storage tank and clean the residual liquid in the tank in time.
Hechi PPH reactor manufacturer
The key manufacturing method used in the production of PPH storage tank is one-time forming coiling manufacturing method, so it is simple in structure. The application of PPH storage tank is relatively convenient due to its simple construction. In the actual engineering construction and application, the vertical PPH storage tank usually only considers the static load due to the low application frequency, and the safety performance is slightly increased. For the vertical PPH storage tank with large capacity, the concrete rubber support and the metal rubber support can be considered, but the metal rubber support is too tightly bound, and the plastic has some folding and swelling, It will do harm to the compressive strength of the storage tank, and the appearance is not beautiful. It is proposed to use concrete rubber bearings. Second, for those with small capacity, it is OK to immediately consider plastic rubber bearings.
Hechi PPH reactor manufacturer
The production method of PPH storage tank is one-time forming coiling method, so its structure is relatively simple and its application is relatively convenient. PPH extrusion winding seamless plastic anti-corrosion equipment, polypropylene storage tank, polypropylene reactor, waste gas absorption tower, washing tower, storage tank and other plastic anti-corrosion equipment. As a new type of high-quality product, what are the main technical characteristics of PPH storage tank? Chemical resistance: among all polypropylene pipes, the experiment proves that PPH pipe has strong chemical resistance; Long service life: PPH pipe has longer service life and higher system safety; Impact strength: Compared with traditional PPH pipe, PPH pipe has significant low-temperature impact strength; Internal and external anti-corrosion: It has the characteristics of internal and external anti-corrosion, and can be placed in a highly corrosive environment; High performance: good performance of PH pipe, flexible welding equipment and special technical support team can not only guarantee（ β)- The welding installation quality of PP-H pipe system can also provide customized processing of non-standard products for customers according to their needs.
Hechi PPH reactor manufacturer
Physical anti-corrosion of PPH winding tank: during processing, appropriate oily film-forming agent is used in the mesh, so that the anti-corrosion effect of the produced equipment will be much better when it is used. For example, the use of some lead containing pigments and oil together can make the anti-corrosion coating more compact, which will also reduce the penetration of substances to the equipment. Phosphate pigments are basic acid salts that are difficult to dissolve after hydrolysis, which can effectively block the pinholes in the coating. The oxide produced by iron or the flake mica powder and other pigments can reduce the permeability of the anti-corrosion coating when filling, so the PPH winding tank can play a good role in anti-corrosion physically.
