Zigong PPH storage tank manufacturer
Comparison of PPH mixing tank price and PP mixing tank and maintenance measures. It is necessary to use electric heating to melt and extrude the particles onto the steel mold, which consumes a lot of power. The PP storage tank only has the power of the welding gun, so it consumes less power; The raw material of PPH mixing tank is PPH granular material, and the raw material of PP storage tank is polypropylene plate. The price of PPH granular material is more expensive than polypropylene plate; Cooling and demoulding are required, which are performed by electric device, but not for PP storage tank; Steel molds are required for processing, and natural gas is required for preheating before processing. The startup cost is high, and PP storage tank is directly rolled into a tank with polypropylene plates, so the cost is low; The PPH mixing tank is welded with a large extrusion electric heating drag gun, which consumes a lot of power. The PP storage tank uses a small manual drag gun, which consumes less power.
Zigong PPH storage tank manufacturer
Working principle of PPH waste gas purification tower: there are multi-stage packing rings inside. During operation, waste gas flows upward from the bottom. Due to tangential entry into the tower, especially the guiding role of the packing layer, the rising flue gas rotates, resulting in good contact between the packing layer and the pollutants in the waste gas and the liquid, which has a large contact area between the gas and the liquid; The droplets will also rotate through the air flow, and the centrifugal force generated will enhance the gas contact at night. After being thrown to the tower wall, the liquid drops will flow down the wall and reach the next layer of packing through the overflow device. The nozzle will atomize again to contact with gas and liquid. The liquid can be effectively separated after full contact with the gas, and the dust particles in the gas will be removed by adhering the water mist to the filler layer. In addition, dust and fog drops will be thrown onto the tower wall under the action of centrifugal force, and flow to the bottom of the tower to be removed, thus reducing the possibility of dust and fog drops brought by air flow from the tower.
Zigong PPH storage tank manufacturer
PPH mixing tank is made by seamless extrusion winding technology. Pipe orifice, inner weld and outer weld are all processed by automatic extrusion unit equipment, which is superior, stronger and lower than plastic tanks made by traditional technology. It is necessary to use electric heating to melt and extrude the particles onto the steel mold, which consumes a lot of power. The PP storage tank only has the power of the welding gun, so it consumes less power; The PPH mixing tank is welded with a large extrusion electric heating drag gun, which consumes a lot of power. The PP storage tank uses a small manual drag gun, which consumes less power. PPH reaction kettle uses PPH spiral extrusion and winding unit to process PPH granules into tank body forming process. The system adopts the process of hot melting PPH particles, extruding them, and then winding them onto steel dies to form cans. PPH reaction kettle has the characteristics of good integrity, uniform thickness, corrosion resistance, seamless, aging resistance and good leakage resistance.
Zigong PPH storage tank manufacturer
PPH storage tank is also a polypropylene storage tank. Polypropylene can be divided into many types, and PPH is only one of them. PPH storage tank has great advantages in strength, acid and alkali resistance, aging resistance and appearance. The plastic storage tank is made of polypropylene (PP), reinforced polypropylene (PPH) and other raw materials, and is integrally molded by a special rotational molding process. There are no welding, no leakage, light weight, aging resistance, impact resistance, corrosion resistance, and long service life. So there is only one letter difference between PPH storage tank and PP storage tank. Is there any relationship between them? Don't tell me, there are really connections and differences. Let's get to know. PPH storage tank is formed by using alloy polypropylene technology at one time, but PP storage tank is rolled with polypropylene sheet, so its anti-corrosion performance will be much lower. PPH storage tank is more resistant to temperature than ordinary polypropylene, and can resist the erosion of strong chemicals. In addition, the properties of PP material and PPH material are similar, acid and alkali resistant and corrosion resistant. PPH storage tank is more expensive than PP storage tank. The plastic storage tank has great performance in terms of performance and is relatively durable. To some extent, it is a kind of tank that cannot be replaced by ordinary storage tanks.
Zigong PPH storage tank manufacturer
PPH tank itself uses polypropylene in some new process tanks, so it has better corrosion resistance and other properties when used. In many aspects, its performance is better than that of tanks made of other materials, and its service life is longer under natural conditions. There are many advantages, so before use, please carefully check the PPH storage tank in order to better use it. PPH storage tank shall be used before appearance inspection, and its surface shall be free of crack, shrinkage cavity, slag, folding, heavy leather and other defects. The damage depth of mechanical equipment with corrosion depth and dent depth shall not exceed the allowable value of relative product execution standards. The shell test pressure of PPH storage tank valve shall not be less than 1.5 times of the nominal pressure, and the test time shall not be less than 5 minutes. The shell packaging shall be qualified without leakage. The nominal pressure test shall be conducted, and the valve sealing surface shall be qualified. If you want to soften the PPH storage tank, the temperature is about 100 ℃, so we must control the liquid temperature between minus 40 ℃ and 60 ℃ during storage.
