Mianyang PPH reactor manufacturing
In the case of selecting the form of HDPE storage tank, it must still be determined according to the requirements, and it can perform well in terms of quality. Fortunately, superior product quality is certainly a basis for recognition. The better the product is, the more popular it will be. Its characteristics in all aspects are better, which is also a key to the requirements of industrial production and application. Products with good reputation will be more reassuring, so that they can be better in service level. If they are better in service level, they must be a basis for seeking good results, and then they can benefit from good product quality. Because there are many specifications of products, in order to meet the application requirements of different occasions, it is still necessary to select products based on actual requirements. In addition, HDPE tank repair can be made of polymer composite materials. The leakage test or hydraulic test shall be carried out after the bucket is repaired or replaced according to the internal and external inspection regulations.
Mianyang PPH reactor manufacturing
The key manufacturing method used in the production of PPH storage tank is one-time forming coiling manufacturing method, so it is simple in structure. The application of PPH storage tank is relatively convenient due to its simple construction. In the actual engineering construction and application, the vertical PPH storage tank usually only considers the static load due to the low application frequency, and the safety performance is slightly increased. For the vertical PPH storage tank with large capacity, the concrete rubber support and the metal rubber support can be considered, but the metal rubber support is too tightly bound, and the plastic has some folding and swelling, It will do harm to the compressive strength of the storage tank, and the appearance is not beautiful. It is proposed to use concrete rubber bearings. Second, for those with small capacity, it is OK to immediately consider plastic rubber bearings.
Mianyang PPH reactor manufacturing
HDPE is a part of the plastic recycling market with rapid growth. This is mainly because it is easy to reprocess, has a limited degradation characteristics and is widely used in packaging. The main recycling is to reprocess 25% of recycled materials, such as post consumer recyclables (PCR), with pure HDPE to make bottles not in contact with food. In addition, due to the good insulation performance of HDPE storage tanks, polyethylene is used in many cables, and has good impact resistance even in low environment, In addition, this type of storage tank is more convenient for processing, and can be processed again after use, but it can not be used in industries directly contacting food after secondary processing.
Mianyang PPH reactor manufacturing
PPH storage tank vertical storage tank is a plastic storage tank made of PPH granular materials after processing. The barrel of PPH storage tank is made of PPH granules through extrusion and winding process, and the product is formed at one time without welding. PPH storage tank is made of polypropylene plate by welding. From the perspective of corrosion resistance, the corrosion resistance of PPH vertical storage tank is similar to that of PPH vertical storage tank. From the perspective of safety performance, the PPH tank cylinder is integrally formed without welding and leakage, while the PPH tank is welded, which is easy to cause leakage and increase unsafe factors. And there is a big gap between the other properties of the two, such as anti-aging performance. The nozzle installation is the last process, which is equivalent to the reduced version of bottom welding. That is, the imported small automatic extrusion welding unit is used to weld the connecting pipe and flange into shape, and then the hole opener is used to cut the corresponding caliber on the tank body, and then the domestic portable extrusion welding is used. PPH storage tanks are widely used in chemical, pharmaceutical, dye, chemical fiber, metallurgy, textile and other industries to store various corrosive media. The utility model has the advantages of long service life of corrosion resistance, light self weight, safe transportation, convenient maintenance, etc.
