Installation of Nanchong PPH winding tank
HDPE storage tank is used as a sealed vessel for storing liquid or gas, which is called storage tank. The construction of HDPE storage tank project is an indispensable and vital infrastructure construction for oil and gas, chemical industry, grain, oil and food, food factory, fire safety, transportation, metallurgy industry, national defense safety and other professions. Because the area and environment of use are different, the intensity of sunlight is also different. The intensity of sunlight will have a certain impact on the service life of HDPE storage tanks, so sunscreen is also part of daily maintenance, which can extend the service life and reduce daily wear and tear. In the application process of HDPE storage tank, if conditions permit, it can be placed indoors, which can effectively avoid the problem of sunscreen. However, if the HDPE storage tank is placed outdoors, it must be maintained if it is exposed to wind and rain. Make a sunshade to prevent direct sunlight. The other way is to apply a light color coating on the surface of HDPE storage tank to reduce heat absorption and resist ultraviolet rays, and also improve the aging resistance of HDPE storage tank. In use, factors that can cause certain damage should be avoided, especially the sunscreen problem of polypropylene storage tank.
Installation of Nanchong PPH winding tank
Working principle of PPH waste gas purification tower: there are multi-stage packing rings inside. During operation, waste gas flows upward from the bottom. Due to tangential entry into the tower, especially the guiding role of the packing layer, the rising flue gas rotates, resulting in good contact between the packing layer and the pollutants in the waste gas and the liquid, which has a large contact area between the gas and the liquid; The droplets will also rotate through the air flow, and the centrifugal force generated will enhance the gas contact at night. After being thrown to the tower wall, the liquid drops will flow down the wall and reach the next layer of packing through the overflow device. The nozzle will atomize again to contact with gas and liquid. The liquid can be effectively separated after full contact with the gas, and the dust particles in the gas will be removed by adhering the water mist to the filler layer. In addition, dust and fog drops will be thrown onto the tower wall under the action of centrifugal force, and flow to the bottom of the tower to be removed, thus reducing the possibility of dust and fog drops brought by air flow from the tower.
Installation of Nanchong PPH winding tank
What are the anti-corrosion treatment of PPH storage tank? For PPH storage tanks storing oil and product oil, since the performance required by the anti-corrosion materials in PPH storage tanks is electrostatic conduction, all PPH storage tanks shall be subject to anti-corrosion treatment with electrostatic conduction coating. The treatment of the external anti-corrosion coating of the tank is a comprehensive treatment that takes into account the anti-corrosion performance, weather resistance and aesthetic performance of the tank. In the design of anti-corrosion coating for PPH storage tank, it is necessary to consider that each anti-corrosion coating has temperature resistance and compatibility. If the alkyd anti-corrosion coating is used, it is necessary to avoid direct matching, because it will react with zinc powder. The cathodic corrosion protection of the tank is divided into impressed current cathodic protection on the outside of the bottom plate of the tank, and protective treatment on the anode of the ponding layer in the tank.
Installation of Nanchong PPH winding tank
PPH mixing tank can be divided into two forms: sloping bottom and flat bottom. The corrosion resistant container with full plastic structure is made of modified polypropylene laminate, pure polypropylene or glass fiber reinforced pure polypropylene through secondary processing. Select and configure motors, reducers, mixing paddles, heating devices, etc. according to the actual situation of customers. This product is corrosion resistant, scientific in design, reasonable in structure, excellent in performance, complete in specifications and patterns, safe and reliable in use. It is mainly applicable to the reaction kettle, which is widely used in the material reaction in the production of petroleum, chemical industry, rubber, pesticide, dye, medicine, food and other industries. PPH mixing tank product description: production process: PPH reaction kettle uses PPH spiral extrusion winding unit to process PPH granules into tank body forming process. The system adopts the process of hot melting PPH particles, extruding them, and then winding them onto steel dies to form cans. PPH reaction kettle has the characteristics of good integrity, uniform thickness, corrosion resistance, seamless, aging resistance and good leakage resistance. Application field: It is used in chemical industry, metallurgy, rare earth, electronics, dyes, pigments, dyes, environmental protection, pharmaceuticals, power plants, brewing and other industries. Material used: PPH. Product specification: can be customized according to customer requirements.
