Bijie PPH winding tank price
PPH waste gas purification tower is also called PPH waste gas treatment tower. In industrial production, with the chemical processes such as pickling and electroplating, different concentrations of acid and alkali containing gases are generated, causing serious environmental pollution. PPH waste gas treatment tower is an ideal equipment for purifying gas containing acid and alkali. It was successfully developed after digestion, transplantation, test and continuous improvement of imported equipment. Function: Mainly used for environmental protection equipment for acid/alkali waste gas treatment such as sulfuric acid, nitric acid, hydrofluoric acid and hydrochloric acid during operation. The acid mist purification tower has high purification efficiency, compact structure, small floor area, good corrosion resistance, aging resistance, light weight, easy installation, transportation, maintenance and management, etc.
Bijie PPH winding tank price
When the storage tank made of polyethylene is produced and processed again, it does not need to use traditional welding, so its volume will be larger when it carries liquid. Because the HDPE storage tank does not need to be welded, so there is no weld. When it is used again, it does not need to worry about instability due to too much carrying liquid. Generally speaking, most storage tanks have a stability coefficient. The reason why the stability performance of storage tanks is different is that the performance of raw materials used is different. If the materials used are poor, even if the process is good, the stability performance is not guaranteed. When selecting raw materials for storage tanks, the first thing we should do is to check the quality certificate and inspection report of the raw materials. After checking, all data can be put into production only if they meet the standards. Besides, plates are used at the top and bottom of the tank, so there are requirements for plates.
Bijie PPH winding tank price
The small softening point of PPH storage tank is 108 ℃, and the large fragmentation point is - 70 ℃, so PP storage tank can generally be used to hold liquid with temperature ranging from - 40 ℃ to 60 ℃. The feed inlet, discharge outlet, liquid level gauge outlet, flange, etc. on the PPH storage tank body are all integrally formed and welded at one time, without additional feed inlet and outlet. When containing acid-base substances, acid-base resistant gaskets shall be provided. When organic substances (especially organic solvents) are contained, insoluble rubber gaskets shall be provided. PPH storage tank is made of polypropylene, which can contain inorganic acids, malic acid, salts, ammonium, alkalis, oils and most gaseous organic substances at normal temperature and pressure. PPH storage tank cannot be used to contain strong oxidants, such as concentrated sulfuric acid, concentrated nitric acid, etc. When using PPH storage tank, we should not forget that it is just a tool we use. If the tool is not used properly, it will also break down. Therefore, why we use PPH storage tank with different life depends on how we treat them.
Bijie PPH winding tank price
During the processing of PPH winding tank, there are three core points: tank body fabrication, internal and external weld welding, and manhole installation. These three core points will affect the integrity, aging resistance, leakage resistance, service life, mechanical strength and other properties of the tank. PPH granular material is melted on the spiral extrusion winding unit, and then the melted extrusion material forms a tank on the mold, and demoulding is carried out after the temperature is reduced to a certain degree, so as to ensure the integrity of the tank. However, the traditional processing method is plate butt welding to form a tank body. Since the z width of the plate is 2000 mm and the tank body height is generally more than 2000 mm, in actual processing, the tank body is formed by manual welding of sections of the tank body. Then, to be safe, a stiffening ring is added at the joint of the tank body. PPH winding tank is formed by direct processing of PPH particles, without secondary processing. Traditionally, particles are processed into plates, and then the plates are processed into tank bodies; In addition, the PPH winding tank has no problems of joints, welds and leakage, and the overall mechanical strength is far greater than that of tanks processed by traditional processes because of the need for chamfer welding.
Bijie PPH winding tank price
The forming process of PPH storage tank adopts spiral extrusion winding technology with reliable quality. The main processes include tank extrusion winding, external welding, internal seam welding, pipe orifice installation, etc. Can body extrusion winding is the process of using PPH spiral extrusion winding unit to process PPH granules into can body molding. The system adopts the process of hot melting PPH particles, extruding them, and then winding them onto steel dies to form cans. The production efficiency of this process is about 5-8 times higher than that of manual process, and the product is flat and beautiful, with good integrity, no joints, good corrosion resistance and leakage resistance. The tank body is thin at the top and thick at the bottom, and the size and shape of the product are not limited. External welding is the process of using the imported automatic extrusion welding unit to make the large weld of the tank with large stress be welded in one time. The new PPH granular material with the same property as the tank body is hot melted at the large weld seam, and is integrated with the tank bottom and tank body. The process features high mechanization and automation, and stable product quality. The weld specifications can be designed according to the stress characteristics of the product to give full play to the integrity of the weld, reduce flash, and make the joint smooth and beautiful. In addition, the ultraviolet absorber is added to PPH granular material to resist aging and extend the service life.
Bijie PPH winding tank price
PPH storage tank is more advanced in materials and processing technology than polypropylene storage tank, but this will not lead to the price of the former being significantly higher than the latter, which is mainly due to the removal of intermediate profits and labor saving in the intermediate plate link. The whole tank body is thin and thick, so that the whole cylinder body is evenly stressed, the design is reasonable, and the mechanical strength and safety reliability of the tank body are guaranteed. In addition to being able to safely fill various corrosive liquids and having good sealing performance, the tank is light in weight and clean in appearance, and has more reliable advantages than plastic roll forming technology, plastic plate welding, FRP roll, hand glue technology, carbon steel lining technology and other technologies. The welding of the bottom of the tank and the bottom of the tank is the part that bears the large stress z. The internal and bottom of the tank are welded by mechanical cantilever, which can realize the large welding once without repeated welding, ensure that the tank and the tank will not leak under the rh condition, and can safely withstand various corrosive liquid operations.
