Qingyuan PPH storage tank manufacturer
PPH storage tanks play an important role in people's life, but due to different areas and environments, PPH storage tanks are exposed to different sunlight intensities. The intensity of sunlight will affect the service life of PPH storage tank to some extent, so attention should be paid to protecting PPH storage tank. During the use of PPH tank, if the indoor conditions are much better, but the PPH tank is used outdoors, in order to extend the service life of the tank, z can make a sunshade, and can also brush the appearance of the tank on a layer of light paint a year. In this way, the heat absorption and UV resistance can be reduced, and the anti-aging ability of the PPH tank can be improved. In addition, the strength of PPH storage tank service life has a certain impact on production costs and production benefits. Therefore, factors causing certain damage to PPH storage tank should be avoided during use, especially the sun protection of PPH storage tank.
Qingyuan PPH storage tank manufacturer
The thickness requirements for the bottom plate and top plate of PPH storage tank, the previous welding process is to use a portable welding gun to melt the welding rod, and then weld the tank body and bottom plate together. Since the welding rod is an external accessory, it cannot guarantee the consistency of the material with the bottom plate and tank body, which has a certain impact on the quality of equipment. Using a portable welding gun to weld, it cannot achieve the same welding strength, and the weld surface is uneven, There are many hidden dangers for equipment leakage. The bottom plate and can body are welded by mechanical welding process, which can be divided into external welding and internal welding. The external welding of PPH storage tank is a process that uses the imported automatic extrusion welding unit to realize the one-time welding molding of large welds at the stressed parts of the storage tank. The new PPH granular material with the same property as the tank body is hot melted at the large weld seam, and is integrated with the tank bottom and tank body. Internal welding is an automatic long arm extrusion welding process, which is an important step in all processes. Its principle is the same as external welding, but its equipment is different.
Qingyuan PPH storage tank manufacturer
PPH waste gas purification tower is also called PPH waste gas treatment tower. In industrial production, with the chemical processes such as pickling and electroplating, different concentrations of acid and alkali containing gases are generated, causing serious environmental pollution. PPH waste gas treatment tower is an ideal equipment for purifying gas containing acid and alkali. It was successfully developed after digestion, transplantation, test and continuous improvement of imported equipment. Function: Mainly used for environmental protection equipment for acid/alkali waste gas treatment such as sulfuric acid, nitric acid, hydrofluoric acid and hydrochloric acid during operation. The acid mist purification tower has high purification efficiency, compact structure, small floor area, good corrosion resistance, aging resistance, light weight, easy installation, transportation, maintenance and management, etc.
Qingyuan PPH storage tank manufacturer
The raw material of PPH mixing tank is PPH granular material, and the raw material of PP storage tank is polypropylene plate. The price of PPH granular material is more expensive than polypropylene plate; The processing of PPH mixing tank requires the use of steel molds. Before processing, natural gas is used for preheating. The startup cost is high. The PP storage tank is directly rolled into a tank with polypropylene plates, which costs little; The PPH mixing tank needs to use electric heating to melt and extrude the particles onto the steel mold, which consumes a lot of power. The PP storage tank only has the power of the welding gun, which consumes less power; The PPH mixing tank needs to be cooled and then demoulded, which are all performed by electric devices, but not the PP storage tank; The PPH mixing tank is welded with a large extrusion electric heating gun, which consumes a lot of power. The PP storage tank is welded with a small manual gun, which consumes less power; Others, such as steel mold replacement, equipment land occupation and equipment maintenance, are not required for PP storage tanks.
Qingyuan PPH storage tank manufacturer
PPH storage tank is resistant to most acids, alkalis, organics, and mixed liquids. As long as the operating temperature is within the limited range, there will be no corrosion. Many media that PPH storage tank can resist will corrode stainless steel (special stainless steel is outside); In terms of protection, PPH storage tank is simple in protection and tools, and the manufacturer can handle it by himself; The operation temperature of dangerous chemicals is generally normal temperature, and the high operation temperature of PPH storage tank can reach 100 ℃. PPH storage tank has become a necessary equipment for chemical industry, smelting, rare earth, mining, pigment, printing and dyeing, new data, new energy, biomedicine, and even some professions have changed some stainless steel reaction kettles with normal temperature and pressure into reaction kettles made of PPH raw materials.
