Price of Changsha PPH storage tank
In the case of selecting the form of HDPE storage tank, it must still be determined according to the requirements, and it can perform well in terms of quality. Fortunately, superior product quality is certainly a basis for recognition. The better the product is, the more popular it will be. Its characteristics in all aspects are better, which is also a key to the requirements of industrial production and application. Products with good reputation will be more reassuring, so that they can be better in service level. If they are better in service level, they must be a basis for seeking good results, and then they can benefit from good product quality. Because there are many specifications of products, in order to meet the application requirements of different occasions, it is still necessary to select products based on actual requirements. In addition, HDPE tank repair can be made of polymer composite materials. The leakage test or hydraulic test shall be carried out after the bucket is repaired or replaced according to the internal and external inspection regulations.
Price of Changsha PPH storage tank
The key manufacturing method used in the production of PPH storage tank is one-time forming coiling manufacturing method, so it is simple in structure. The application of PPH storage tank is relatively convenient due to its simple construction. When the rubber bearing is a plastic rubber bearing, the compressive strength, stiffness, service life and total number of manufacturing shall be considered. When the rubber bearing is a metal rubber bearing, the other standards shall be the same as 1. In addition, the surface of metal rubber bearing shall be corrosion resistant. When the rubber bearing is a concrete rubber bearing, the concrete rubber bearing of the first horizontal tank shall consider the compression strength provisions, and the total number of rubber bearings shall be 2. When there are several rubber bearings, their design elevation shall be the same, and there is no need for uneven ground settlement, and the bottom shall be basically flat.
Price of Changsha PPH storage tank
PPH storage tank has good temperature resistance, acid and alkali resistance, high strength and impact resistance, longer service life, and no environmental stress fracture damage. At present, the tank has become a necessary equipment for chemical industry, smelting, rare earth, mining, pigment, printing and dyeing, new materials, new energy, and biomedicine. In the next few years, PPH storage tanks will be widely used. Manufacturing process of PPH storage tank: extruding and winding PPH granular materials. The product is formed at one time without welding. PPH tank is welded by polypropylene plate. In terms of corrosion resistance, PPH vertical storage tank and PH vertical storage tank have similar corrosion resistance. From the perspective of safety performance, the PPH tank shell is integrally formed without welding and leakage, while the PPH tank is welded, which is easy to cause leakage and increase unsafe factors. There is a big gap between the other two properties, such as aging resistance.
Price of Changsha PPH storage tank
The thickness requirements for the bottom plate and top plate of PPH storage tank, the previous welding process is to use a portable welding gun to melt the welding rod, and then weld the tank body and bottom plate together. Since the welding rod is an external accessory, it cannot guarantee the consistency of the material with the bottom plate and tank body, which has a certain impact on the quality of equipment. Using a portable welding gun to weld, it cannot achieve the same welding strength, and the weld surface is uneven, There are many hidden dangers for equipment leakage. The bottom plate and can body are welded by mechanical welding process, which can be divided into external welding and internal welding. The external welding of PPH storage tank is a process that uses the imported automatic extrusion welding unit to realize the one-time welding molding of large welds at the stressed parts of the storage tank. The new PPH granular material with the same property as the tank body is hot melted at the large weld seam, and is integrated with the tank bottom and tank body. Internal welding is an automatic long arm extrusion welding process, which is an important step in all processes. Its principle is the same as external welding, but its equipment is different.
Price of Changsha PPH storage tank
Safety method for HDPE storage tank operation: When entering the construction site, workers shall wear safety helmets and fasten safety belts for high-altitude operation. Foam fire extinguishers and other fire-fighting equipment shall be placed separately on site. In case of any abnormal phenomenon during the pressure test of HDPE storage tank, it is strictly prohibited to operate under pressure. If there is abnormal movement of rh during commissioning, it shall be parked for inspection. When installing HDPE storage tanks, special personnel shall be assigned to command the lifting and commissioning, and multiple command is prohibited. When lifting HDPE storage tanks, irrelevant personnel are not allowed to enter the site. When lifting heavy objects, the rh person shall not stand below, and the construction site shall be provided with a protective fence. Construction power needs to be connected by special electricians, and non special electricians are not allowed to connect. The construction site is an extension of the factory area. It is forbidden to hit other equipment and process pipes during construction. The original pipes or equipment shall be drilled and approved before construction. HDPE tanks are widely used because of their superior performance. While focusing on personal safety, everyone can increase efficiency and product value through safety measures. The above is about the safety method of HDPE storage tank operation. You can understand that good results can be achieved only by following the correct operation method in the use process.
Price of Changsha PPH storage tank
Basic regulations for installation of PPH storage tank, service platform level and ability to withstand relative working pressure. If the steel frame structure is adopted, the gap should not be too large, and the wooden board or stainless steel plate should be laid. Check whether there are sharp objects such as steel nails on the wooden board to avoid damaging the storage tank or using concrete as the industrial foundation. Provisions for smooth leveling. Generally speaking, the mud road can be paved with blockboard to improve the compressive strength and working pressure. When organic chemicals are stored in PPH storage tank (first contact the manufacturer to order thickened storage tank), good outlet pipe trench and diluent equipment, or leakage alarm system shall be provided after the storage tank arrives at the site. It shall be provided around the site. When storing chemical liquid, first communicate with the manufacturer to determine the standard of storage tank, such as thickened storage tank. During operation, if PPH storage tank needs to be monitored, it can be monitored by level gauge or induction device. When it has been used for a long time, please refer to the storage requirements of PPH storage tank and clean the residual liquid in the tank in time.
