Qujing PPH storage tank manufacturing

For the treatment of corrosive gases (such as acid and alkaline waste gas) in PPH waste gas tower, liquid absorption method is often used. The key to control the waste gas by liquid absorption is the selection of purification equipment. The main development is acid and alkaline waste gas purification process and equipment with high purification efficiency, simple operation and management, and long service life. This process and product are characterized by simple structure, low energy consumption, high purification efficiency and wide application range, and can effectively remove water-soluble gases such as hydrogen chloride (HCl), hydrogen fluoride (HF), ammonia (NH3), sulfuric acid mist (H2SO4), chromic acid mist (CrO3), cyanuric acid gas (HCN), alkali vapor (NaOH), hydrogen sulfide gas (H2S), formalin (HCHO), etc. The acid mist waste gas is introduced into the purification tower through the air duct. After passing through the packing layer, the waste gas and sodium hydride absorption liquid are fully contacted, absorbed and neutralized by gas-liquid two-phase reaction. After purification, the acid mist waste gas is dewatered and defogged by the demister, and then discharged into the atmosphere by the fan. The absorption liquid is sprayed down from the tower top after being pressurized by the water pump at the tower bottom, and then flows back to the tower bottom for recycling.

Qujing PPH storage tank manufacturing

What are the anti-corrosion treatment of PPH storage tank? For PPH storage tanks storing oil and product oil, since the performance required by the anti-corrosion materials in PPH storage tanks is electrostatic conduction, all PPH storage tanks shall be subject to anti-corrosion treatment with electrostatic conduction coating. The treatment of the external anti-corrosion coating of the tank is a comprehensive treatment that takes into account the anti-corrosion performance, weather resistance and aesthetic performance of the tank. In the design of anti-corrosion coating for PPH storage tank, it is necessary to consider that each anti-corrosion coating has temperature resistance and compatibility. If the alkyd anti-corrosion coating is used, it is necessary to avoid direct matching, because it will react with zinc powder. The cathodic corrosion protection of the tank is divided into impressed current cathodic protection on the outside of the bottom plate of the tank, and protective treatment on the anode of the ponding layer in the tank.

Qujing PPH storage tank manufacturing

PPH mixing tank is made by seamless extrusion winding technology. Pipe orifice, inner weld and outer weld are all processed by automatic extrusion unit equipment, which is superior, stronger and lower than plastic tanks made by traditional technology. It is necessary to use electric heating to melt and extrude the particles onto the steel mold, which consumes a lot of power. The PP storage tank only has the power of the welding gun, so it consumes less power; The PPH mixing tank is welded with a large extrusion electric heating drag gun, which consumes a lot of power. The PP storage tank uses a small manual drag gun, which consumes less power. PPH reaction kettle uses PPH spiral extrusion and winding unit to process PPH granules into tank body forming process. The system adopts the process of hot melting PPH particles, extruding them, and then winding them onto steel dies to form cans. PPH reaction kettle has the characteristics of good integrity, uniform thickness, corrosion resistance, seamless, aging resistance and good leakage resistance.

Qujing PPH storage tank manufacturing

Pph storage tank is a kind of plastic container made by rotational molding process. it has become the equipment needed for chemical industry, smelting, mining and new materials. Do you know what problems should be paid attention to during the installation and use of pph storage tank? The platform for installing pph storage tank shall be able to bear the weight of storage tank and solution. The platform shall be flat and smooth to prevent some sharp objects from damaging the storage tank. If heavy additional equipment is installed on the tank, or if a person needs to work on the top of the tank but the tank cannot bear the weight of a person, support or related equipment should be used to assist in the operation. When the liquid inlet is higher than the tank bottom, the liquid inlet shall bend towards the tank wall to let the incoming liquid flow along the tank wall, so as to reduce the direct impact of liquid on the tank bottom. When storing chemical liquids, first communicate with the manufacturer to determine the specifications of storage tanks, such as thickened storage tanks. In use, if pph storage tank needs to be monitored, it can be monitored by level gauge or induction device. When it has been used for a long time, please refer to the storage requirements of pph storage tank and clean the residual liquid in the tank in time. If a large amount of liquid is sucked in and discharged from the pph storage tank, special technicians need to be arranged to install the corresponding exhaust pipe.

Qujing PPH storage tank manufacturing

The main contents of cleaning the HDPE storage tank are as follows: at the end of each manufacturing, clean the surface of the HDPE container with fingers, and continuously clean the outside of the mechanical equipment with a large amount of water. Damage to the thermal insulation layer is strictly prohibited. According to the processing technology, the solution can be cleaned after a certain period of time. For a long time, more than 72 hours, machines and equipment should be cleaned again before class. It is forbidden to enter acid liquor into the bobbin of this commodity. If the cleaning box requires acid, do not use acid with pH<2. Once the acid enters the casing of this mechanical equipment, hydrogen effect will occur, and the surface will fall like a fish scale on a large scale. The general cleaning cylinder uses 2% of sodium hypochlorite solution and uses tap water to clean the cylinder. The HDPE tank shall be cleaned according to the requirements of Chinese standards. When entering the machine and equipment for cleaning, the water bottle should be padded at the bottom of the sponge pad to prevent special tools from falling in. Wear rubber shoes to prevent damage to the laminated glass. To sort out the actual staff, the records must be sorted out immediately to determine the work experience and the inspection and signature of the project.