Shantou PPH Storage Tank Company
PPH waste gas purification tower is also called PPH waste gas treatment tower. In industrial production, with the chemical processes such as pickling and electroplating, different concentrations of acid and alkali containing gases are generated, causing serious environmental pollution. PPH waste gas treatment tower is an ideal equipment for purifying gas containing acid and alkali. It was successfully developed after digestion, transplantation, test and continuous improvement of imported equipment. Function: Mainly used for environmental protection equipment for acid/alkali waste gas treatment such as sulfuric acid, nitric acid, hydrofluoric acid and hydrochloric acid during operation. The acid mist purification tower has high purification efficiency, compact structure, small floor area, good corrosion resistance, aging resistance, light weight, easy installation, transportation, maintenance and management, etc.
Shantou PPH Storage Tank Company
Basic regulations for installation of PPH storage tank, service platform level and ability to withstand relative working pressure. If the steel frame structure is adopted, the gap should not be too large, and the wooden board or stainless steel plate should be laid. Check whether there are sharp objects such as steel nails on the wooden board to avoid damaging the storage tank or using concrete as the industrial foundation. Provisions for smooth leveling. Generally speaking, the mud road can be paved with blockboard to improve the compressive strength and working pressure. When organic chemicals are stored in PPH storage tank (first contact the manufacturer to order thickened storage tank), good outlet pipe trench and diluent equipment, or leakage alarm system shall be provided after the storage tank arrives at the site. It shall be provided around the site. When storing chemical liquid, first communicate with the manufacturer to determine the standard of storage tank, such as thickened storage tank. During operation, if PPH storage tank needs to be monitored, it can be monitored by level gauge or induction device. When it has been used for a long time, please refer to the storage requirements of PPH storage tank and clean the residual liquid in the tank in time.
Shantou PPH Storage Tank Company
PPH storage tank is resistant to most acids, alkalis, organics, and mixed liquids. As long as the operating temperature is within the limited range, there will be no corrosion. Many media that PPH storage tank can resist will corrode stainless steel (special stainless steel is outside); In terms of protection, PPH storage tank is simple in protection and tools, and the manufacturer can handle it by himself; The operation temperature of dangerous chemicals is generally normal temperature, and the high operation temperature of PPH storage tank can reach 100 ℃. PPH storage tank has become a necessary equipment for chemical industry, smelting, rare earth, mining, pigment, printing and dyeing, new data, new energy, biomedicine, and even some professions have changed some stainless steel reaction kettles with normal temperature and pressure into reaction kettles made of PPH raw materials.
Shantou PPH Storage Tank Company
PPH storage tank mainly includes core processes such as tank body fabrication, bottom, top, manhole, internal and external welding of inlet and outlet flange interface, which will directly affect the integrity, aging resistance, leakage prevention, service life and mechanical strength of the entire PPH storage tank. PPH storage tank body is manufactured by spiral extrusion winding technology. PPH particles are melted on the spiral extrusion winding machine, and then the molten extrusion materials form a can body on the mold. When the temperature is reduced to a certain extent, the tank can be demoulded to ensure the integrity of the tank. However, in the traditional processing form of polypropylene tank, the plate is welded into the tank. Since the very wide plate is 2000 mm, the height of the tank body is generally more than 2000 mm. In actual processing, the tank bodies are welded one by one and then formed manually. Then, for safety reasons, a stiffening ring is added at the connection of the tank.
