Jieyang PPH reactor manufacturer
The performance characteristics of PPH storage tank are anti-corrosion and free of leakage. Easy to install, maintain and replace. Long service life, good sealing performance. High polymer plastic sliding roller can prevent the strip steel surface from being pulled during pickling. PPH storage tanks are commonly used for the storage and temporary storage of production materials in chemical, petroleum, medicine, food, grease, printing and dyeing, metallurgy, environmental protection, light industry and other industries. Because PPH storage tank has unique advantages over traditional anti-corrosion tank. Next, the advantages of PPH storage tank are introduced in detail. PPH storage tank has good integrity, no welding, no leakage, impact resistance, high tensile strength, good aging resistance, and meets the hygienic food standards. Due to the good performance of LLDPE and the special structure of polypropylene rolling tank, the service life of LLDPE can reach more than 15 years. Good chemical resistance. Except for some solutions that can make it expand, it can bear most of the material solutions. Polypropylene tank has the characteristics of internal and external anti-corrosion, and can be placed in a highly corrosive environment. Generally, the working conditions of storage tanks are atmospheric temperature and pressure; Under special circumstances, the working conditions of the storage tank can be lower than 70 ℃, and the hydraulic pressure can be less than 1 kg/cm2.
Jieyang PPH reactor manufacturer
PPH storage tank is more advanced in materials and processing technology than polypropylene storage tank, but this will not lead to the price of the former being significantly higher than the latter, which is mainly due to the removal of intermediate profits and labor saving in the intermediate plate link. The whole tank body is thin and thick, so that the whole cylinder body is evenly stressed, the design is reasonable, and the mechanical strength and safety reliability of the tank body are guaranteed. In addition to being able to safely fill various corrosive liquids and having good sealing performance, the tank is light in weight and clean in appearance, and has more reliable advantages than plastic roll forming technology, plastic plate welding, FRP roll, hand glue technology, carbon steel lining technology and other technologies. The welding of the bottom of the tank and the bottom of the tank is the part that bears the large stress z. The internal and bottom of the tank are welded by mechanical cantilever, which can realize the large welding once without repeated welding, ensure that the tank and the tank will not leak under the rh condition, and can safely withstand various corrosive liquid operations.
Jieyang PPH reactor manufacturer
PPH waste gas treatment tower is generally divided into cylindrical tower body or square tower body. The cylindrical tower body is generally vertical tower, and the square tower body is generally horizontal tower. There are multi-stage packing rings inside. During operation, the waste gas flows upward from the bottom of the tower. Due to tangential entry into the tower, especially the guiding effect of the packing layer, the flue gas rotates and rises, resulting in full contact between the packing layer and the waste gas, which sprays the downstream liquid into droplets, leaving a large contact area between gas and liquid; The liquid droplets will also be driven by the air flow to rotate, and the centrifugal force generated will strengthen the air contact at night. They will fall onto the tower wall and flow down along the wall, passing through the overflow device to the next layer of packing, and then the spray nozzle will atomize again for gas-liquid contact.
Jieyang PPH reactor manufacturer
PPH storage tank mainly includes core processes such as tank body fabrication, bottom, top, manhole, internal and external welding of inlet and outlet flange interface, which will directly affect the integrity, aging resistance, leakage prevention, service life and mechanical strength of the entire PPH storage tank. PPH storage tank body is manufactured by spiral extrusion winding technology. PPH particles are melted on the spiral extrusion winding machine, and then the molten extrusion materials form a can body on the mold. When the temperature is reduced to a certain extent, the tank can be demoulded to ensure the integrity of the tank. However, in the traditional processing form of polypropylene tank, the plate is welded into the tank. Since the very wide plate is 2000 mm, the height of the tank body is generally more than 2000 mm. In actual processing, the tank bodies are welded one by one and then formed manually. Then, for safety reasons, a stiffening ring is added at the connection of the tank.
Jieyang PPH reactor manufacturer
PPH storage tank has the advantages of corrosion resistance, corrosion prevention, long service life, light self weight, high strength, safe transportation, convenient maintenance, etc. The working pressure of PPH storage tank is normal pressure, and the working temperature is PPH-10 ℃~120 ℃, and PVC-40 ℃~60 ℃. PPH storage tank has the advantages of one-step forming without welding joint, impact resistance, aging resistance, light weight, no leakage, acid and alkali resistance, long service life, and compliance with health standards. PPH storage tank has excellent chemical corrosion resistance, and has good corrosion resistance to inorganic acid, alkali and salt (except oxidizing media). Common PPH tank solutions include dilute sulfuric acid, hydrochloric acid, hydrofluoric acid, hydrogen peroxide, phosphoric acid, ammonia, etc. Rotational plastic anti-corrosion PP storage tank has great advantages in large size, large capacity and large volume products. Although the volume is large, it only maintains the characteristics of one-time molding integrity, which is beyond the reach of other storage tank processes. Compared with the traditional anti-corrosion storage tank, the price is low and the performance price ratio is high.
Jieyang PPH reactor manufacturer
The storage tank is a new spiral wound disposable product with no welding cracks and better sealing performance. The thickness of PPH storage tank is not affected by the manufacturing materials. The external welding of PPH storage tank is a process that uses the imported automatic extrusion welding unit to make the large weld of the storage tank with high stress be welded in one time. The new PPH granular material with the same property as the tank body is hot melted at the large weld seam, and is integrated with the tank bottom and tank body. Welding process characteristics of PPH storage tank bottom: high mechanization and automation, stable product quality; The weld specifications can be designed according to the stress characteristics of the products, so as to give full play to the integrity of the weld; It can reduce flash, and the joints are smooth and beautiful.