Yunfu PPH Reactor Company
The key requirements of PPH tank design are: no danger, reliable: the data of high strength and toughness of materials, and the interchangeability structure of media should have sufficient rigidity and pressure bending performance, and the sealing performance should be good. Meet process request: function request of life request. Good comprehensive economy has high consumption efficiency, low consumption coefficient, reasonable structure, complicated manufacturing, convenient transportation and convenient equipment. Easy to operate, maintain and control: maintain and better control. Good environmental performance of PPH storage tank: At present, great progress has been made in the design scheme, engineering construction and data information of large and medium-sized storage tanks in China. However, our country still lacks experience in the design and construction of high strength data of large storage tanks. In the future, our country should strengthen the development and implementation of large storage tanks to make the production process of large storage tanks more carbon friendly.
Yunfu PPH Reactor Company
The key manufacturing method used in the production of PPH storage tank is one-time forming coiling manufacturing method, so it is simple in structure. The application of PPH storage tank is relatively convenient due to its simple construction. In the actual engineering construction and application, the vertical PPH storage tank usually only considers the static load due to the low application frequency, and the safety performance is slightly increased. For the vertical PPH storage tank with large capacity, the concrete rubber support and the metal rubber support can be considered, but the metal rubber support is too tightly bound, and the plastic has some folding and swelling, It will do harm to the compressive strength of the storage tank, and the appearance is not beautiful. It is proposed to use concrete rubber bearings. Second, for those with small capacity, it is OK to immediately consider plastic rubber bearings.
Yunfu PPH Reactor Company
PPH storage tank mainly includes core processes such as tank body fabrication, bottom, top, manhole, internal and external welding of inlet and outlet flange interface, which will directly affect the integrity, aging resistance, leakage prevention, service life and mechanical strength of the entire PPH storage tank. PPH storage tank body is manufactured by spiral extrusion winding technology. PPH particles are melted on the spiral extrusion winding machine, and then the molten extrusion materials form a can body on the mold. When the temperature is reduced to a certain extent, the tank can be demoulded to ensure the integrity of the tank. However, in the traditional processing form of polypropylene tank, the plate is welded into the tank. Since the very wide plate is 2000 mm, the height of the tank body is generally more than 2000 mm. In actual processing, the tank bodies are welded one by one and then formed manually. Then, for safety reasons, a stiffening ring is added at the connection of the tank.
Yunfu PPH Reactor Company
What are the anti-corrosion treatment of PPH storage tank? For PPH storage tanks storing oil and product oil, since the performance required by the anti-corrosion materials in PPH storage tanks is electrostatic conduction, all PPH storage tanks shall be subject to anti-corrosion treatment with electrostatic conduction coating. The treatment of the external anti-corrosion coating of the tank is a comprehensive treatment that takes into account the anti-corrosion performance, weather resistance and aesthetic performance of the tank. In the design of anti-corrosion coating for PPH storage tank, it is necessary to consider that each anti-corrosion coating has temperature resistance and compatibility. If the alkyd anti-corrosion coating is used, it is necessary to avoid direct matching, because it will react with zinc powder. The cathodic corrosion protection of the tank is divided into impressed current cathodic protection on the outside of the bottom plate of the tank, and protective treatment on the anode of the ponding layer in the tank.
Yunfu PPH Reactor Company
The thickness requirements for the bottom plate and top plate of PPH storage tank, the previous welding process is to use a portable welding gun to melt the welding rod, and then weld the tank body and bottom plate together. Since the welding rod is an external accessory, it cannot guarantee the consistency of the material with the bottom plate and tank body, which has a certain impact on the quality of equipment. Using a portable welding gun to weld, it cannot achieve the same welding strength, and the weld surface is uneven, There are many hidden dangers for equipment leakage. The bottom plate and can body are welded by mechanical welding process, which can be divided into external welding and internal welding. The external welding of PPH storage tank is a process that uses the imported automatic extrusion welding unit to realize the one-time welding molding of large welds at the stressed parts of the storage tank. The new PPH granular material with the same property as the tank body is hot melted at the large weld seam, and is integrated with the tank bottom and tank body. Internal welding is an automatic long arm extrusion welding process, which is an important step in all processes. Its principle is the same as external welding, but its equipment is different.
