Guilin PPH reactor price
In the case of selecting the form of HDPE storage tank, it must still be determined according to the requirements, and it can perform well in terms of quality. Fortunately, superior product quality is certainly a basis for recognition. The better the product is, the more popular it will be. Its characteristics in all aspects are better, which is also a key to the requirements of industrial production and application. Products with good reputation will be more reassuring, so that they can be better in service level. If they are better in service level, they must be a basis for seeking good results, and then they can benefit from good product quality. Because there are many specifications of products, in order to meet the application requirements of different occasions, it is still necessary to select products based on actual requirements. In addition, HDPE tank repair can be made of polymer composite materials. The leakage test or hydraulic test shall be carried out after the bucket is repaired or replaced according to the internal and external inspection regulations.
Guilin PPH reactor price
Why can PPH storage tank replace stainless steel? The comparison of two kinds of dangerous chemical storage tanks is made from the aspects of mechanical strength, service life, corrosion parameters, maintenance, service temperature, etc. The service life of PPH storage tank is usually 8-10 years, while that of stainless steel storage tank is 10-13 years more; The mechanical strength of stainless steel storage tank is higher than that of PPH storage tank, but hazardous chemicals storage tank is generally placed statically, instead of storage tank with high mechanical strength; PPH storage tank is resistant to most acids, alkalis, organics and mixed liquids. As long as the service temperature is within the limited range, there will be no corrosion. Many media that PPH storage tank can resist will corrode stainless steel (except special stainless steel); In terms of maintenance, PPH storage tank is simple in maintenance and tools, which can be handled by the manufacturer; The service temperature of dangerous chemicals is generally normal temperature, and the high service temperature of PPH storage tank z can reach 100 ℃.
Guilin PPH reactor price
For the treatment of corrosive gases (such as acid and alkaline waste gas) in PPH waste gas tower, liquid absorption method is often used. The key to control the waste gas by liquid absorption is the selection of purification equipment. The main development is acid and alkaline waste gas purification process and equipment with high purification efficiency, simple operation and management, and long service life. This process and product are characterized by simple structure, low energy consumption, high purification efficiency and wide application range, and can effectively remove water-soluble gases such as hydrogen chloride (HCl), hydrogen fluoride (HF), ammonia (NH3), sulfuric acid mist (H2SO4), chromic acid mist (CrO3), cyanuric acid gas (HCN), alkali vapor (NaOH), hydrogen sulfide gas (H2S), formalin (HCHO), etc. The acid mist waste gas is introduced into the purification tower through the air duct. After passing through the packing layer, the waste gas and sodium hydride absorption liquid are fully contacted, absorbed and neutralized by gas-liquid two-phase reaction. After purification, the acid mist waste gas is dewatered and defogged by the demister, and then discharged into the atmosphere by the fan. The absorption liquid is sprayed down from the tower top after being pressurized by the water pump at the tower bottom, and then flows back to the tower bottom for recycling.
Guilin PPH reactor price
The reason why the price of PPH storage tank is higher than that of PP storage tank. The production process is different. PP storage tank is a kind of storage tank made by welding polypropylene plates, while PPH storage tank is made by processing PPH particles after physical treatment. The raw materials are different. The raw material of PPH storage tank is PPH granular material, and the raw material of PP storage tank is polypropylene plate. The cost of PPH granular material is higher than that of polypropylene plate; Due to different processing equipment, PPH storage tank needs to use steel mold for processing, and it needs to use natural gas for preheating before processing. The startup cost is high, and PP storage tank directly uses polypropylene plate to enter the tank, so the cost is low; The power consumption is different. The PPH storage tank needs to use electric heating to melt the granular materials out of the steel mold. The power consumption is large. The PP storage tank is only the welding gun of the electric welding point, and the power consumption is small; PPH storage tank needs to be cooled and then demoulded, which is carried out through electrical equipment rather than PP storage tank; PPH storage tank is welded with extrusion type large electric heating traction gun, which has high power consumption. PP storage tank is welded with manual small traction gun, which has low power consumption; The labor cost is different. PPH storage tank has less labor than PP storage tank, which is why many plastic storage tank manufacturers hope to develop PPH storage tank.
Guilin PPH reactor price
Physical anti-corrosion of PPH winding tank: during processing, appropriate oily film-forming agent is used in the mesh, so that the anti-corrosion effect of the produced equipment will be much better when it is used. For example, the use of some lead containing pigments and oil together can make the anti-corrosion coating more compact, which will also reduce the penetration of substances to the equipment. Phosphate pigments are basic acid salts that are difficult to dissolve after hydrolysis, which can effectively block the pinholes in the coating. The oxide produced by iron or the flake mica powder and other pigments can reduce the permeability of the anti-corrosion coating when filling, so the PPH winding tank can play a good role in anti-corrosion physically.
Guilin PPH reactor price
What are the advantages and features of PPH waste gas treatment spray tower: the process of PPH waste gas treatment spray tower is simple, the operating cost is low, the installation is convenient, and the corrosion resistance is good; The ppH waste gas treatment spray tower has stable performance and high purification efficiency; The ppH waste gas treatment spray tower is light in weight, convenient for installation, transportation and maintenance management; The ppH waste gas treatment spray tower is especially suitable for water-soluble dust laden gas; The internal spray of ppH waste gas treatment spray tower is uniform, and the gas-liquid contact area is large; PpH waste gas treatment spray tower has low noise, stable operation, simple operation and convenience; It is specially used for neutralizing acid and alkali gases produced by electroplating industry and Wuduo surface treatment. It adopts excellent PPH board, and the air volume can be adjusted randomly.
