Price of Zunyi PPH storage tank
HDPE is a part of the plastic recycling market with rapid growth. This is mainly because it is easy to reprocess, has a limited degradation characteristics and is widely used in packaging. The main recycling is to reprocess 25% of recycled materials, such as post consumer recyclables (PCR), with pure HDPE to make bottles not in contact with food. In addition, due to the good insulation performance of HDPE storage tanks, polyethylene is used in many cables, and has good impact resistance even in low environment, In addition, this type of storage tank is more convenient for processing, and can be processed again after use, but it can not be used in industries directly contacting food after secondary processing.
Price of Zunyi PPH storage tank
The internal welding of PPH storage tank is an automatic long arm extrusion welding process, which is an important step in all processes. The new PPH granular material with the same nature as the tank body is hot melted at the internal weld seam, and is integrated with the tank bottom and tank body. The principle is the same as that of external welding, but its equipment is different. Internal welding process characteristics of PPH storage tank: high mechanization and automation, stable product quality; The weld specifications can be designed according to the stress characteristics of the products, so as to give full play to the integrity of the weld; The product has good integrity, the weld is integrated with the parent body, and has good corrosion resistance and leakage resistance; It can reduce flash, and the joints are smooth and beautiful. UV absorber is added to PPH granules to prevent aging and prolong service life.
Price of Zunyi PPH storage tank
PPH storage tank has good temperature resistance, acid and alkali resistance, high strength and impact resistance, longer service life, and no environmental stress fracture damage. At present, the tank has become a necessary equipment for chemical industry, smelting, rare earth, mining, pigment, printing and dyeing, new materials, new energy, and biomedicine. In the next few years, PPH storage tanks will be widely used. Manufacturing process of PPH storage tank: extruding and winding PPH granular materials. The product is formed at one time without welding. PPH tank is welded by polypropylene plate. In terms of corrosion resistance, PPH vertical storage tank and PH vertical storage tank have similar corrosion resistance. From the perspective of safety performance, the PPH tank shell is integrally formed without welding and leakage, while the PPH tank is welded, which is easy to cause leakage and increase unsafe factors. There is a big gap between the other two properties, such as aging resistance.
Price of Zunyi PPH storage tank
PPH mixing tank is made by seamless extrusion winding technology. Pipe orifice, inner weld and outer weld are all processed by automatic extrusion unit equipment, which is superior, stronger and lower than plastic tanks made by traditional technology. It is necessary to use electric heating to melt and extrude the particles onto the steel mold, which consumes a lot of power. The PP storage tank only has the power of the welding gun, so it consumes less power; The PPH mixing tank is welded with a large extrusion electric heating drag gun, which consumes a lot of power. The PP storage tank uses a small manual drag gun, which consumes less power. PPH reaction kettle uses PPH spiral extrusion and winding unit to process PPH granules into tank body forming process. The system adopts the process of hot melting PPH particles, extruding them, and then winding them onto steel dies to form cans. PPH reaction kettle has the characteristics of good integrity, uniform thickness, corrosion resistance, seamless, aging resistance and good leakage resistance.
