Yulin PPH reactor manufacturing
PPH waste gas purification tower is also called PPH waste gas treatment tower. In industrial production, with the chemical processes such as pickling and electroplating, different concentrations of acid and alkali containing gases are generated, causing serious environmental pollution. PPH waste gas treatment tower is an ideal equipment for purifying gas containing acid and alkali. It was successfully developed after digestion, transplantation, test and continuous improvement of imported equipment. Function: Mainly used for environmental protection equipment for acid/alkali waste gas treatment such as sulfuric acid, nitric acid, hydrofluoric acid and hydrochloric acid during operation. The acid mist purification tower has high purification efficiency, compact structure, small floor area, good corrosion resistance, aging resistance, light weight, easy installation, transportation, maintenance and management, etc.
Yulin PPH reactor manufacturing
The forming process of PPH storage tank adopts spiral extrusion winding technology with reliable quality. The main processes include tank extrusion winding, external welding, internal seam welding, pipe orifice installation, etc. Can body extrusion winding is the process of using PPH spiral extrusion winding unit to process PPH granules into can body molding. The system adopts the process of hot melting PPH particles, extruding them, and then winding them onto steel dies to form cans. The production efficiency of this process is about 5-8 times higher than that of manual process, and the product is flat and beautiful, with good integrity, no joints, good corrosion resistance and leakage resistance. The tank body is thin at the top and thick at the bottom, and the size and shape of the product are not limited. External welding is the process of using the imported automatic extrusion welding unit to make the large weld of the tank with large stress be welded in one time. The new PPH granular material with the same property as the tank body is hot melted at the large weld seam, and is integrated with the tank bottom and tank body. The process features high mechanization and automation, and stable product quality. The weld specifications can be designed according to the stress characteristics of the product to give full play to the integrity of the weld, reduce flash, and make the joint smooth and beautiful. In addition, the ultraviolet absorber is added to PPH granular material to resist aging and extend the service life.
Yulin PPH reactor manufacturing
The storage tank is a new spiral wound disposable product with no welding cracks and better sealing performance. The thickness of PPH storage tank is not affected by the manufacturing materials. The external welding of PPH storage tank is a process that uses the imported automatic extrusion welding unit to make the large weld of the storage tank with high stress be welded in one time. The new PPH granular material with the same property as the tank body is hot melted at the large weld seam, and is integrated with the tank bottom and tank body. Welding process characteristics of PPH storage tank bottom: high mechanization and automation, stable product quality; The weld specifications can be designed according to the stress characteristics of the products, so as to give full play to the integrity of the weld; It can reduce flash, and the joints are smooth and beautiful.
Yulin PPH reactor manufacturing
The working principle of PPH waste gas tower is to separate the pollutants in the gas and convert them into harmless substances to purify the gas. It belongs to differential contact countercurrent type. The packing in the tower body is the basic component of gas-liquid two-phase contact. After the gas outside the tower body enters the tower body, the gas enters the packing layer. On the packing layer, there is spray liquid from the top and spray liquid in front, and a layer of liquid film is formed on the packing. When the gas flows through the packing gap, it contacts with the packing liquid film for absorption or comprehensive reaction, The packing layer can provide sufficient surface area without causing excessive resistance to the gas flow. The absorbed or integrated gas is collected by the demister and discharged out of the tower through the air outlet.
Yulin PPH reactor manufacturing
HDPE is a part of the plastic recycling market with rapid growth. This is mainly because it is easy to reprocess, has a limited degradation characteristics and is widely used in packaging. The main recycling is to reprocess 25% of recycled materials, such as post consumer recyclables (PCR), with pure HDPE to make bottles not in contact with food. In addition, due to the good insulation performance of HDPE storage tanks, polyethylene is used in many cables, and has good impact resistance even in low environment, In addition, this type of storage tank is more convenient for processing, and can be processed again after use, but it can not be used in industries directly contacting food after secondary processing.
Yulin PPH reactor manufacturing
PPH storage tank mainly includes core processes such as tank body fabrication, bottom, top, manhole, internal and external welding of inlet and outlet flange interface, which will directly affect the integrity, aging resistance, leakage prevention, service life and mechanical strength of the entire PPH storage tank. PPH storage tank body is manufactured by spiral extrusion winding technology. PPH particles are melted on the spiral extrusion winding machine, and then the molten extrusion materials form a can body on the mold. When the temperature is reduced to a certain extent, the tank can be demoulded to ensure the integrity of the tank. However, in the traditional processing form of polypropylene tank, the plate is welded into the tank. Since the very wide plate is 2000 mm, the height of the tank body is generally more than 2000 mm. In actual processing, the tank bodies are welded one by one and then formed manually. Then, for safety reasons, a stiffening ring is added at the connection of the tank.
