Danzhou PPH storage tank manufacturer

The main purpose of the mixing tank is to mix, mix, blend and homogenize materials. Features: Convenient, convenient, time-saving, effectively shortens the mixing time, saves labor, and speeds up production. It is the main equipment for modern industrial production. PPH mixing tank uses PPH spiral extrusion winding unit to process PPH granules into tank body molding process. The system adopts the process of hot melting PPH particles, extruding them, and then winding them onto steel dies to form cans. PPH mixing tank is characterized by good integrity, uniform thickness, corrosion resistance, seam free, aging resistance and good leakage resistance. This product is widely used in chemical industry, metallurgy, rare earth, electronics, dyes, pigments, dyes, environmental protection, pharmaceuticals, power plants, brewing and other industries.

Danzhou PPH storage tank manufacturer

PPH storage tank mainly includes core processes such as tank body fabrication, bottom, top, manhole, internal and external welding of inlet and outlet flange interface, which will directly affect the integrity, aging resistance, leakage prevention, service life and mechanical strength of the entire PPH storage tank. PPH storage tank body is manufactured by spiral extrusion winding technology. PPH particles are melted on the spiral extrusion winding machine, and then the molten extrusion materials form a can body on the mold. When the temperature is reduced to a certain extent, the tank can be demoulded to ensure the integrity of the tank. However, in the traditional processing form of polypropylene tank, the plate is welded into the tank. Since the very wide plate is 2000 mm, the height of the tank body is generally more than 2000 mm. In actual processing, the tank bodies are welded one by one and then formed manually. Then, for safety reasons, a stiffening ring is added at the connection of the tank.

Danzhou PPH storage tank manufacturer

The key manufacturing method used in the production of PPH storage tank is one-time forming coiling manufacturing method, so it is simple in structure. The application of PPH storage tank is relatively convenient due to its simple construction. When the rubber bearing is a plastic rubber bearing, the compressive strength, stiffness, service life and total number of manufacturing shall be considered. When the rubber bearing is a metal rubber bearing, the other standards shall be the same as 1. In addition, the surface of metal rubber bearing shall be corrosion resistant. When the rubber bearing is a concrete rubber bearing, the concrete rubber bearing of the first horizontal tank shall consider the compression strength provisions, and the total number of rubber bearings shall be 2. When there are several rubber bearings, their design elevation shall be the same, and there is no need for uneven ground settlement, and the bottom shall be basically flat.

Danzhou PPH storage tank manufacturer

Physical anti-corrosion of PPH winding tank: during processing, appropriate oily film-forming agent is used in the mesh, so that the anti-corrosion effect of the produced equipment will be much better when it is used. For example, the use of some lead containing pigments and oil together can make the anti-corrosion coating more compact, which will also reduce the penetration of substances to the equipment. Phosphate pigments are basic acid salts that are difficult to dissolve after hydrolysis, which can effectively block the pinholes in the coating. The oxide produced by iron or the flake mica powder and other pigments can reduce the permeability of the anti-corrosion coating when filling, so the PPH winding tank can play a good role in anti-corrosion physically.