Lincang PPH storage tank manufacturing
PPH tank itself uses polypropylene in some new process tanks, so it has better corrosion resistance and other properties when used. In many aspects, its performance is better than that of tanks made of other materials, and its service life is longer under natural conditions. There are many advantages, so before use, please carefully check the PPH storage tank in order to better use it. PPH storage tank shall be used before appearance inspection, and its surface shall be free of crack, shrinkage cavity, slag, folding, heavy leather and other defects. The damage depth of mechanical equipment with corrosion depth and dent depth shall not exceed the allowable value of relative product execution standards. The shell test pressure of PPH storage tank valve shall not be less than 1.5 times of the nominal pressure, and the test time shall not be less than 5 minutes. The shell packaging shall be qualified without leakage. The nominal pressure test shall be conducted, and the valve sealing surface shall be qualified. If you want to soften the PPH storage tank, the temperature is about 100 ℃, so we must control the liquid temperature between minus 40 ℃ and 60 ℃ during storage.
Lincang PPH storage tank manufacturing
PPH storage tanks play an important role in people's life, but due to different areas and environments, PPH storage tanks are exposed to different sunlight intensities. The intensity of sunlight will affect the service life of PPH storage tank to some extent, so attention should be paid to protecting PPH storage tank. During the use of PPH tank, if the indoor conditions are much better, but the PPH tank is used outdoors, in order to extend the service life of the tank, z can make a sunshade, and can also brush the appearance of the tank on a layer of light paint a year. In this way, the heat absorption and UV resistance can be reduced, and the anti-aging ability of the PPH tank can be improved. In addition, the strength of PPH storage tank service life has a certain impact on production costs and production benefits. Therefore, factors causing certain damage to PPH storage tank should be avoided during use, especially the sun protection of PPH storage tank.
Lincang PPH storage tank manufacturing
For the treatment of corrosive gases (such as acid and alkaline waste gas) in PPH waste gas tower, liquid absorption method is often used. The key to control the waste gas by liquid absorption is the selection of purification equipment. The main development is acid and alkaline waste gas purification process and equipment with high purification efficiency, simple operation and management, and long service life. This process and product are characterized by simple structure, low energy consumption, high purification efficiency and wide application range, and can effectively remove water-soluble gases such as hydrogen chloride (HCl), hydrogen fluoride (HF), ammonia (NH3), sulfuric acid mist (H2SO4), chromic acid mist (CrO3), cyanuric acid gas (HCN), alkali vapor (NaOH), hydrogen sulfide gas (H2S), formalin (HCHO), etc. The acid mist waste gas is introduced into the purification tower through the air duct. After passing through the packing layer, the waste gas and sodium hydride absorption liquid are fully contacted, absorbed and neutralized by gas-liquid two-phase reaction. After purification, the acid mist waste gas is dewatered and defogged by the demister, and then discharged into the atmosphere by the fan. The absorption liquid is sprayed down from the tower top after being pressurized by the water pump at the tower bottom, and then flows back to the tower bottom for recycling.
Lincang PPH storage tank manufacturing
The storage tank is a new spiral wound disposable product with no welding cracks and better sealing performance. The thickness of PPH storage tank is not affected by the manufacturing materials. The external welding of PPH storage tank is a process that uses the imported automatic extrusion welding unit to make the large weld of the storage tank with high stress be welded in one time. The new PPH granular material with the same property as the tank body is hot melted at the large weld seam, and is integrated with the tank bottom and tank body. Welding process characteristics of PPH storage tank bottom: high mechanization and automation, stable product quality; The weld specifications can be designed according to the stress characteristics of the products, so as to give full play to the integrity of the weld; It can reduce flash, and the joints are smooth and beautiful.
